Service information: Work on high-pressure lines to rail

W07.16-1141-12

1 Vibration damper

2 Clip

3 High pressure pipe

4 Bracket

Please note that removed high-pressure lines (3) and the removed bracket (4) are not to be reused.

If, during repair work, the bracket (4) or one of the two high-pressure lines (3) is removed, the bracket (4), both high-pressure lines (3), both clamps (2) and both vibration dampers (1) must always be replaced.

The parts to be replaced are listed in the high-pressure line parts kit (see Parts ordering notes).

 The repair instructions concerned have been revised and will be published in the WIS with release 06/2012.

Parts ordering notes