Remove/install control unit for lumbar spine support

Tyyppi ar · aihe 91.10 · versio 0105 · 2004-08-25

Koskee: MODEL 950.###, 952.###, 953.###, 954.### ## up to 516699 with CODE (SH1) "Grammer" comfort driver suspension seat with CODE (SH2) "Grammer" comfort passenger suspension seat MODEL 970.###, 972.###, 974.###, 975.###, 976.### ## up to 516699 with CODE (SH1) "Grammer" comfort driver suspension seat with CODE (SH2) "Grammer" comfort passenger suspension seat

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

AR91.10-W-3425A

10.7.98

MODEL 950.###, 952.###, 953.###, 954.### ## up to 516699
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer" comfort passenger suspension seat

MODEL 970.###, 972.###, 974.###, 975.###, 976.### ## up to 516699
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer" comfort passenger suspension seat

Remove/install control unit for lumbar spine support

W91.10-1014-11

1 Control unit

2 Compressed air line (lumbar spine support)

3 Compressed air line (compressed air supply)

4 Cover

 	Remove/Install
1	Remove control unit (1)	 First pull control unit (1) at bottom out of the cover (4).
2	Cut off compressed-air line (lumbar support) (2) and compressed-air line (compressed air supply) (3) and remove control button unit (1)	 Mark compressed-air lines and cut off right in front of the air line connection.  Installation: Secure compressed-air line (lumbar support) (2) and compressed-air line (compressed air supply) (3) with new hose clamps.
3	Install in the reverse order
4	Check compressed-air line (lumbar support) (2) and compressed-air line (compressed air supply) (3) for leaks