AR91.10-W-3340B | Remove/install Bowden cable for seat inclination adjustment | 9.7.98 |
MODELS 950.###, 952.###, 953.###, 954.### ## up to 516699
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer"comfort passenger suspension seat
MODELS 970.###, 972.###, 974.###, 975.###, 976.### ## up to 516699
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer" comfort passenger suspension seat
W91.10-1025-06
1 Gaiter plug
2 Boot
3 Arresting mechanism for seat inclination adjustment
4 Cover
5 Push spring
6 Detent
7 Driver
8 Bowden cable
9 Handle for seat inclination adjustment
10 Pin
11 Grab rail
12 Screw
13 Cover, left
14 Handle, backrest adjustment
| Remove/install | ||
1 | Remove seat cushion | ||
2 | Remove button unit for lumbar support | ||
3 | Remove handle for backrest adjustment (14) | ||
4 | Remove left cover (13) | ||
5 | Remove gaiter plug (1) and lay CV boot (2) downward | ||
6 | Unscrew screws (12) and remove grab rail (11) | ||
7 | Remove handle for seat inclination adjustment (9) | Drive out pin (10) to the rear until the handle of the seat inclination adjustment can be removed. | |
8 | Remove arresting mechanism for seat inclination adjustment (3) | Place seat inclination adjustment completely to the top and secure seat in highest position. Detach cap (4) and remove push springs (5) and detents (6). | |
9 | Detach Bowden cable (8) out of driver (7) | ||
10 | Install in the reverse order |