ar8370w5683a

Removing and installing flame sensor

Tyyppi ar · aihe 83.70 · versio 0101 · 2004-09-17

Koskee: MODEL 950, 952, 953, 954 with BODY 940.899 with CODE (H62) Warm air heater "Eberspächer D3 LP" MODEL 950, 952, 953, 954 with BODY 942.899 with CODE (H62) Warm air heater "Eberspächer D3 LP" MODEL 970, 972, 974, 975, 976 with BODY 972.899 with CODE (H62) Warm air auxiliary heater "Eberspächer" D3 LP'

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 83 Lämmitys, tuuletus ja ilmastointi › 83.70 Lisälämmityslaite, automaattinen lisälämmitin — Mallisarja 940 (mallit 899) · Mallisarja 942 (mallit 899) · Mallisarja 950 · Mallisarja 952 · Mallisarja 953 · Mallisarja 954 · Mallisarja 970 · Mallisarja 972 · Mallisarja 974 · Mallisarja 975 · Mallisarja 976

EinPAS 39 Lämmitys/tuuletus/jäähdytys › 39.25 Lisälämmitys/lisälämmitin › 39.25.12 Tunnistin/katkaisin/johtosarja — Mallisarja 940 (mallit 899) · Mallisarja 942 (mallit 899) · Mallisarja 950 · Mallisarja 952 · Mallisarja 953 · Mallisarja 954 · Mallisarja 970 · Mallisarja 972 · Mallisarja 974 · Mallisarja 975 · Mallisarja 976

AR83.70-W-5683A

Removing and installing flame sensor

1.8.96

MODEL 950, 952, 953, 954 with BODY 940.899 with CODE (H62) Warm air heater "Eberspächer D3 LP"

MODEL 950, 952, 953, 954 with BODY 942.899 with CODE (H62) Warm air heater "Eberspächer D3 LP"

MODEL 970, 972, 974, 975, 976 with BODY 972.899 with CODE (H62) Warm air auxiliary heater "Eberspächer" D3 LP

Removing and installing flame sensor

W83.70-0046-06

1 Upper housing shell

2 Spreading rivet

3 Retaining spring

4 Flame sensor

5 Retainer

6 Retaining clip

7 Exhaust scoop

8 Insulating shell

Removal, installation

1

Remove housing shells

AR83.70-W-5808A

2

Remove insulating shell (8)

Installation: Replace retainer (5).

3

Disconnect flame sensor connector (4)

Installation: When assembling, pay attention to correct cable routing.

4

Remove flame sensor

Pry out retaining spring (3) with pointed tool through opening (arrow).

5

Install in opposite order

Danger!

Fuel vapors present an explosion hazard. Combustion gases are toxic when inhaled. Heater can cause severe burns during and after operation.

Do not start up or operate stationary heaters, auxiliary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves.

AS83.70-Z-0002-01A

6

Check stationary heater for proper operation

AR83.70-W-5302-02C

Viitatut asiakirjat