ar8370d5653a

Removing and installing fuel strainer in intake connection of fuel metering pump

Tyyppi ar · aihe 83.70 · versio 0104 · 1998-07-31

Koskee: MODEL 902.32# /42#, 903.32# /42#, 904.32# /42# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater Heater designation D1L-C MODEL 903.02# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater Heater designation B1L-C

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 83 Lämmitys, tuuletus ja ilmastointi › 83.70 Lisälämmityslaite, automaattinen lisälämmitin — Mallisarja 902 (mallit 32*, 42*) · Mallisarja 903 (mallit 02*, 32*, 42*) · Mallisarja 904 (mallit 32*, 42*)

EinPAS 39 Lämmitys/tuuletus/jäähdytys › 39.25 Lisälämmitys/lisälämmitin › 39.25.46 Pumppu/säiliö — Mallisarja 902 (mallit 32*, 42*) · Mallisarja 903 (mallit 02*, 32*, 42*) · Mallisarja 904 (mallit 32*, 42*)

AR83.70-D-5653A

Removing and installing fuel strainer in intake connection of fuel metering pump

4.11.96

MODEL 902.32# /42#, 903.32# /42#, 904.32# /42# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater
Heater designation D1L-C

MODEL 903.02# ## up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater
Heater designation B1L-C

Removing and installing fuel strainer in intake connection of fuel metering pump

D83.70-0016-06

1 Fuel line
2 Hose clamp
3 Fuel metering pump
4 Union nut
5 Fuel strainer

Removal, installation

Danger!

Fuel vapors present an explosion hazard. Combustion gases are toxic when inhaled. Heater can cause severe burns during and after operation

Do not start up or operate stationary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves.

AS83.70-Z-0002-01A

Danger!

Fuel vapors present an explosion hazard. Fuel vapors are toxic when inhaled or absorbed. Contact with fuel can cause eye and skin injury.

Fire, open lights and smoking prohibited.
Fill and store fuel only in containers intended for this purpose and marked accordingly.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Loosen hose clamp (2)

2

Pull off fuel line (1)

Catch fuel running out.

3

Unscrew union nut (4)

Hold fuel pump to loosen union nut.

4

Remove fuel strainer (5)

5

Install in opposite order

Viitatut asiakirjat