Remove/install anti-icing switch for passenger compartment air conditioning

Tyyppi ar · aihe 83.50 · versio 0105 · 2005-03-16

Koskee: MODEL 901.67, 902.67, 903.67 with CODE (HH7) Additional air conditioning in rear MODEL WD2, WD3, WD6, WD7 with CODE (HH7) Additional air conditioning in rear MODEL 903.672 with CODE (HK2) Air conditioning in rear with underfloor condenser

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 83 Lämmitys, tuuletus ja ilmastointi › 83.50 Takatila-ilmastointilaite — Mallisarja 901 (mallit 67*) · Mallisarja 902 (mallit 67*) · Mallisarja 903 (mallit 67*, 672)

EinPAS 39 Lämmitys/tuuletus/jäähdytys › 39.15 Ilmastointi › 39.15.12 Tunnistin/katkaisin/johtosarja — Mallisarja 901 (mallit 67*) · Mallisarja 902 (mallit 67*) · Mallisarja 903 (mallit 67*, 672)

AR83.50-D-6400NA

Remove/install anti-icing switch for passenger compartment air conditioning

23.2.01

MODEL 901.67, 902.67, 903.67 with CODE (HH7) Additional air conditioning in rear

MODEL WD2, WD3, WD6, WD7 with CODE (HH7) Additional air conditioning in rear

MODEL 903.672 with CODE (HK2) Air conditioning in rear with underfloor condenser

Remove/install anti-icing switch for passenger compartment air conditioning

D83.50-1112-12

1 Rubber grommet

2 Connector

3 Anti-icing switch

4 Bolt

5 Anti-icing switch sensor

6 Air inlet grate

 	Remove/Install
1	Detach air inlet grate (6) from the evaporator paneling
2	Detach plugs (2) from anti-icing switch (3) and remove screws (4)
3	Remove anti-icing switch (3)	 Installation: Do not kink sensor for anti-icing switch (5) and insert it carefully into evaporator. Ensure that the rubber grommet (1) is properly seated.
4	Install in the reverse order