Disassemble and assemble heater housing

Tyyppi ar · aihe 83.25 · versio 0103 · 2003-09-15

Koskee: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic" MODEL XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 except CODE (HH9) Automatic air conditioning "Tempmatic"

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

AR83.25-D-1001D

8.2.01

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic"

MODEL XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 except CODE (HH9) Automatic air conditioning "Tempmatic"

D83.25-1108-12

1 Bolt

2 Heater housing cover

3 Gasket

4 Heater housing

5 Wiring harness

6 Bolt

7 Heat exchanger

8 Connector

9 Gasket

10 O-Ring

 	Disassembling, assembling
1	Remove gaskets (3 and 9)	 Installation: Clean sealing surfaces and install new gaskets.
2	Remove heater housing cover (2)
3	Remove heat exchanger (7) from the heater housing (4)
4	Remove wiring harness (5)
5	Unscrew connecting piece (8)	 Installation: install new O-rings (10).
6	Assemble in reverse order