Removing and installing loudspeaker in instrument panel

Tyyppi ar · aihe 82.62 · versio 0105 · 2003-09-15

Koskee: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 690.6

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

AR82.62-D-7833A

8.7.99

MODEL 901.6, 902.6, 903.6, 904.6, 905.6

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6

D82.62-1101-01

1 Edge guard

2 Loudspeaker cover

3 Loudspeaker

4 Electrical connections

D82.62-1102-01

 	Remove/install
1	Pull off edge guard (1) in area of A-pillar
2	Remove panelings of A-pillar	 Unclip top paneling and pull out upward
3	Remove loudspeaker covers (2)	 Unclip outer covers and pull off in direction of A-pillar
4	Unclip loudspeaker (3)	 Installation: Push lug (arrow) of loudspeaker (3) forward under the instrument panel, then clip in place at rear.
5	Separate electrical connections (4)
6	Install in the reverse order