Check wiper arms and adjust · ar8230p6000t · Mercedes-Benz WIS

AR82.30-P-6000T

Check wiper arms and adjust

15.03.2016

Model

211, 215, 220, 230, 240

Shown on MODEL 211, windshield wiper system in reversing position

1	Driver-side wiper arm
2	Passenger-side wiper arm
A	Distance between driver-side wiper blade and A-pillar
B	Distance between front passenger side wiper blade and A-pillar

P82.30-2318-11

 Danger !	Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism.	When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m).	AS82.30-Z-0001-01A
	Check
1	Manually position windshield wiper system in reversing position
2	Remove wiper blade from driver-side wiper arm (1)	 When working on raised driver-side wiper arm (1), ensure that this does not fall onto the windshield. Otherwise windshield will be damaged.
		 The driver-side wiper arm (1) must not be moved.
3	Check driver-side wiper arm (1)	 The reversing position for the driver-side wiper arm (1) corresponds to the distance from the driver-side wiper blade to the A-pillar (A).
		 Model 240 Distance between driver-side wiper blade and A-pillar (A) approx. 70 mm.
		 Model 211, 215, 220, 230 Distance between driver-side wiper blade and A-pillar (A) approx. 50 mm.
4	Remove wiper blade from passenger-side wiper arm (2)	 When working on raised passenger-side wiper arm (2), ensure that this does not fall onto the windshield. Otherwise windshield will be damaged.
		 The passenger-side wiper arm (2) must not be moved.
5	Check passenger-side wiper arm (2)	 Model 211 The reversing position of the passenger-side wiper arm (2) corresponds to the distance from the passenger-side wiper blade to the A-pillar (B) of approx. 350 mm.
	Clean
6	Clean wiper blade fixtures on driver-side wiper arm (1) and passenger-side wiper arm (2) using a clean cloth
7	Cover driver-side wiper arm (1) using suitable aids (scratch protection)
8	Measure angle of incidence of wiper arm (1) to windshield, note this down and compare test value with adjustment value		AR82.30-P-6000-01T
	Notes on wiper arm adjustment		AH82.30-P-0001-01A
		 When changing from reversing position to parked position, ensure that the driver-side wiper arm (1) makes no direct contact with the windshield. Otherwise, the windshield may be scratched.
		Angle of incidence of wiper arm on driver-side in reversing position	*BE82.30-P-1001-01E
		Angle of incidence of driver-side wiper arm in parked position	*BE82.30-P-1003-01E
		 Adapter	*211589052100
		 Adjusting tool set	*211589022100
9	Cover passenger-side wiper arm (2) using suitable aids (scratch protection)
10	Measure angle of incidence of wiper arm (2) to windshield, note this down and compare test value with adjustment value		AR82.30-P-6000-01T
	Notes on wiper arm adjustment		AH82.30-P-0001-01A
		 When changing from reversing position to parked position, ensure that the passenger-side wiper arm (2) makes no direct contact with the windshield. Otherwise, the windshield may be scratched.
		Angle of incidence of passenger-side wiper arm in reversing position	*BE82.30-P-1002-01E
		Angle of incidence of passenger-side wiper arm in parked position	*BE82.30-P-1004-01E
		 Adapter	*211589052100
		 Adjusting tool set	*211589022100
	Adjust
11	Adjust angle of incidence of driver-side wiper arm (1) in park position	If the test values deviate from the tolerance range in the reversing position or in the parked and reversing position.
	Notes on wiper arm adjustment		AH82.30-P-0001-01A
			AR82.30-P-6100-01T
		 The driver-side wiper arm (1) must be adjusted by at least the value of the tolerance deviation in the reverse position .
		Angle of incidence of driver-side wiper arm in parked position	*BE82.30-P-1003-01E
		 Adapter	*211589052100
		 Adjusting tool set	*211589022100
12	Adjust windshield wiper system	In the event that the check values of the wiper arm (1) deviate from the tolerance range in park position.
		Model 211	AR82.30-P-6400-01T
		Model 215, 220	AR82.30-P-6400-01M
		Model 230	AR82.30-P-6400-01R
		Model 240	AR82.30-P-6400-01H
		Angle of incidence of driver-side wiper arm in parked position	*BE82.30-P-1003-01E
		 Model 211.0/6, 240Nut/bolt, wiper system to partition wall	*BA82.30-P-1007-01A
		 Model 215 Model 220Nut, wiper system	*BA82.30-P-1005-01A
		 Adjusting tool set	*211589022100
		 Model 211 Extraction hook	*140589023300
		 Model 211, 240 Mounting wedge	*110589035900
13	Cover driver-side wiper arm (1) using suitable aids and move windshield wiper system out of park position	 When moving the windshield wiper system out of the park position, ensure that the driver-side wiper arm (1) makes no direct contact with the windshield. Otherwise, the windshield may be scratched.
14	Install driver-side wiper blades	 When working on raised driver-side wiper arm (1), ensure that this does not fall onto the windshield. Otherwise windshield will be damaged.
15	Adjust angle of incidence of passenger-side wiper arm (2) in park position	If the test values deviate from the tolerance range in the reversing position or in the parked and reversing position.
	Notes on wiper arm adjustment		AH82.30-P-0001-01A
			AR82.30-P-6100-01T
		 The passenger-side wiper arm (2) must be adjusted by at least the value of the tolerance deviation in the reverse position .
		Angle of incidence of passenger-side wiper arm in parked position	*BE82.30-P-1004-01E
		 Adapter	*211589052100
		 Adjusting tool set	*211589022100
16	Adjust windshield wiper system	In the event that the check values of the wiper arm (2) deviate from the tolerance range in park position.
		Model 211	AR82.30-P-6400-01T
		Model 215, 220	AR82.30-P-6400-01M
		Model 230	AR82.30-P-6400-01R
		Model 240	AR82.30-P-6400-01H
		 Nut/bolt, wiper system to partition wall	*BA82.30-P-1007-01A
		 Nut, wiper system	*BA82.30-P-1005-01A
		 Adjusting tool set	*211589022100
		 Extraction hook	*140589023300
		 Mounting wedge	*110589035900
17	Cover the passenger-side wiper arm (2) using suitable aids and move the windshield wiper system out of park position	 When moving the windshield wiper system out of the park position, ensure that the passenger-side wiper arm (2) makes no direct contact with the windshield. Otherwise, the windshield may be scratched.
18	Install wiper blades	 When working on the raised passenger-side wiper arm (2), ensure that this does not fall onto the windshield. Otherwise windshield will be damaged.