ar8210s4660e

Remove/install headlamp control unit

Tyyppi ar · aihe 82.10 · versio 0101 · 2015-12-17

Koskee: Model 447 with code LG2 (LED Light package) Model 448.8

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 82 Korin sähkölaitteet › 82.10 Ulkopuoliset valot — Mallisarja 447 · Mallisarja 448 (mallit 8**)

EinPAS 30 Valojärjestelmä › 30.15 Ulkovalot › 30.15.11 Ohjainlaite/rele — Mallisarja 447 · Mallisarja 448 (mallit 8**)

AR82.10-S-4660E

Remove/install headlamp control unit

14.12.2015

Model

447

with code LG2 (LED Light package)

Model

448.8

Remove/install headlamp control unit

S82.10-4589-08

1

Bolts

E1/1

Left front LED lamp unit

E2/1n9

Right headlamp control unit

2

Electrical connectors

E2/1

Right front LED lamp unit

3

Seal

E1/1n9

Left headlamp control unit

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Perform initial startup of left headlamp control unit (E1/1n9) or right headlamp control unit (E2/1n9) with diagnostic system

When replacing left headlamp control unit (E1/1n9) or right headlamp control unit (E2/1n9).

AD00.00-S-2000-04E

2

Remove left front LED lamp unit (E1/1) or right front LED lamp unit (E2/1)

AR82.10-S-4730E

3

Remove bolts (1)

4

Pull out left headlamp control unit (E1/1n9) or right headlamp control unit (E2/1n9) until the electrical connectors (2) can be disconnected

Installation: Ensure that seal (3) is seated correctly.

5

Disconnect electrical connectors (2) and remove left headlamp control unit (E1/1n9) or right headlamp control unit (E2/1n9)

6

Install in the reverse order

Check

7

Carry out function test of the exterior lights

Viitatut asiakirjat