S82.10-4590-08
1 | Bolts | E1/1 | Left front LED lamp unit | E2/1n7 | Actuation module for right front exterior lights LED | ||
2 | Electrical connectors | E2/1 | Right front LED lamp unit | ||||
3 | Seal | E1/1n7 | Actuation module for left front exterior lights LED |
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Perform initial startup of left front actuation module, LED exterior lighting (E1/1n7) or right front actuation module, LED exterior lighting (E2/1n7) with diagnostic system | When replacing left front actuation module, LED exterior lighting (E1/1n7) or right front actuation module, LED exterior lighting (E2/1n7). | |
| |||
2 | Remove left front LED lamp unit (E1/1) or right front LED lamp unit (E2/1) | ||
3 | Remove bolts (1) | ||
4 | Pull out left front actuation module, LED exterior lighting (E1/1n7) or right front actuation module, LED exterior lighting (E2/1n7) until electrical connectors (2) can be disconnected | Installation: Ensure that seal (3) is seated correctly. | |
5 | Disconnect electrical connectors (2) and remove left front actuation module, LED exterior lighting (E1/1n7) or right front actuation module, LED exterior lighting (E2/1n7) | ||
6 | Install in the reverse order | ||
| Check | ||
7 | Carry out function test of the exterior lights |
Viitatut asiakirjat
- ad0000s200004e
- ah5400p000101a Ohjeita elektronisten rakenneosien sähköstaattisen varauksen purkautumisen aiheuttamien vaurioiden välttämiseksi
- ar8210s4730e