Remove/install side paneling in rear

AR68.30-P-4780ED

17.5.11

MODEL 204.3, 207.3 /4
Lower side paneling

P68.30-3518-09

Shown on left side of vehicle on model 207.3

1 Bottom side paneling

2 Clips

6 Expansion clip

7 Clip (on model 207.3)

8 Clamp

3 Screw

4 Rear seat backrest

5 Clip

 	Remove/install
1	Remove side paneling in rear at top		AR68.30-P-4780EC
2	Remove rear seat cushion	Model 204.3, 207	AR91.12-P-1020EC
3.1	Remove side cushion on rear seat backrest	Model 204.3, 207.3	AR91.12-P-1710EC
3.2	Remove rear seat backrest	Model 207.4	AR91.12-P-1620EA
4	Remove door sill molding	 Long wedge	*115589035900
5	Remove edge guard in area of lower side paneling (1)
6	Unclip lower side paneling (1) from clips (2)	 Long wedge	*115589035900
7	Remove screws/bolts (3)
8.1	Unclip lower side paneling (1) from clips (8)	Model 204.3, 207.3
		 Long wedge	*115589035900
8.2	Remove expansion clip (6)	Model 207.4
9.1	Unclip lower side paneling (1) from clips (5) and remove	Model 207.4  Installation: Check clips (5) for damage, replace if necessary.
		 Unclipping device	*452589016300
9.2	Unclip lower side paneling (1) from clips (5, 7) and remove	Model 204.3, 207.3
		 Pivot rear seat backrest (4) as required to remove lower side paneling (1).
		 Installation: Check clips (5, 7) for damage, replace if necessary.
		 Unclipping device	*452589016300
10	Install in the reverse order

452 589 01 63 00

Clip remover

Long wedge

115 589 03 59 00