AR91.12-P-1020EC | Remove/install rear seat cushion | 10.5.12 |
MODEL 204.3 except CODE (P98) Black Series
MODEL 204.3 with CODE (224) Design individual seats in rear
MODEL 207
P91.12-3454-09
Shown on model 207.3
1 Rear seat cushion
2 Support
5 Stowage compartment
6 Rubber pad
7 Screw
3 Wiring harness
4 Cover
P91.12-3570-01
Shown on model 204.3, left side of vehicle
2 Support
3 Wiring harness
8 Adhesive strips
| Remove/install | ||
1 | Move both front seats forward | ||
2 | Open cover (4) of stowage compartment (5) | ||
3 | Remove rubber mounting (6) | ||
4 | Unscrew bolt (7) | ||
5 | Lift rear seat cushion (1) at front and remove in direction of the arrow | Installation: In model 204.3, 207.3: Ensure that retaining brackets at bottom of rear seat cushion (1) are seated correctly in mounts (2) and pay attention to routing and attachment of electrical wiring harness (3) in front of mounts (2). Otherwise electrical wiring harness (3) will be damaged and must be replaced or repaired. | |
6 | Install in the reverse order |