Repair materials
Number | Designation | Order number |
BR00.45-Z-1141-02A | TS adhesive (with isopropanol cleaner) | A 451 989 00 71 |
P65.10-3541-06
Adhesive kit for isopropanol cleaner
4 Adhesive cartridge
6 Primer stick
8 Cleaning cloth
9 Cloth
10 Spacer
11 Cutting wire
12 Application nozzle
13 Wool wiper
P67.10-2176-11
The bonding area on the windshield (1) must be absolutely free of dust and grease to prevent paint adhesion problem of the adhesive material when glazing.
1 Check surface of window for scratches and damage; replace if necessary.
2 Measure position of guide (arrows) by using old gluing point and mark.
When reusing removed windshield (1) and removal with cutting wire.
3.1 Cut off remaining adhesive material on windshield (1) down to maximum height of 2 mm using a scraper. Remove residual adhesive material.
Cut back remaining adhesive material on windshield (1) max. 15 minutes before applying new adhesive bead, because the adhesive material on the cutting surface reacts with the ambient air which can lead to adhesion problems.
When reusing removed windshield (1).
3.2 Clean bonding area on windshield (1) with cleaning rag from repair kit.
When installing new windshield (1).
4.1 Repair damaged primer layer on windshield with primer stick (1) from repair kit.
When reusing removed windshield (1).
Allow primer to flash off for at least 10 - 15 minutes.
4.2 Coat gluing area on windshield with primer stick (1) included in repair kit (max. 20 mm).
When installing new windshield (1).
Allow primer to flash off for at least 10 - 15 minutes.
Windshields are generally delivered with a viewing window on the bottom left. If the viewing window is not required, coat this area on the inside of the windshield (1) with primer stick.