AR49.10-P-7000PP | Removing and installing exhaust system complete | 27.3.00 |
ENGINE 611.962 in MODEL 203.004 /006 /204 /206 /706
ENGINE 612.962 in MODEL 203.016 /216
ENGINE 612.967 in MODEL 209.316
P49.00-2027-06
3 Self-locking nuts
13 Bracket
22 Clamp
23 Sealing cone
32 Clamp
33 Sealing cone
110 Turbocharger
111 Three-was catalytic converter [TWC]
120/1 Pre-catalytic converter
| Remove/Install | ||
Danger! | Risk of injury to skin and eyes from handling hot or glowing objects. | Wear protective gloves, protective clothing and if necessary protective glasses. | |
1 | Remove bottom section of sound-proofing capsule | ||
2 | Remove pre-catalytic converter (120/1) | For this step slacken clamp (22) at turbocharger (110) and clamp (32) downstream of primary catalytic converter (120/1). | |
Replace sealing cone (2333), in order to avoid leakage. | |||
3 | Detach bracket (13) for catalytic converter (111) at transmission | | |
Unscrew self-locking nuts (3) | Installation: Replace self-locking nuts (3). | ||
| |||
4 | Press exhaust system out of rubber mounts | ||
5 | Take off exhaust system | Installation: Install exhaust system free of tension. | |
If the catalytic converter (111) is replaced, slacken pipe clamp of connection of catalytic converter to rear exhaust system | |||
| |||
Hooked wrench for rubber mount | |||
6 | Install in the reverse order |
Exhaust system
Number | Designation | Engine | Engine | Engine 612.961/ | |
BA49.10-P-1003-01E | Nut of exhaust bracket to threaded plate of middle exhaust pipe | Nm | 20 | 20 | 20 |
BA49.10-P-1004-01E | Support for exhaust bracket to transmission | Nm | 20 | 20 | 20 |
BA49.10-P-1005-01E | Pipe clamp for connection between front exhaust pipe/rear exhaust system | Nm | 20 | 20 | 55 |
Commercially available tools
Viitatut asiakirjat
- ar4910p5510pp
- ar9430p5300p Äänieristyskoteloinnin alaosien irrotus ja asennus
- as0000z000201a Loukkaantumisvaara: Kuumat tai hehkuvat esineet voivat aiheuttaa palovammoja.