ar4230p0160gh

Remove/install ABS measuring ring

Tyyppi ar · aihe 42.30 · versio 0110 · 2020-02-04

Koskee: Model 461 with rear axle 741.171/52/53 Model 463 (except 463.270/271) with rear axle 748 up to model year 2013

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 2 Alusta › 42 Jarrujen hydrauliikka ja mekaniikka › 42.30 Lukkiutumattomat jarrut (ABS) — Mallisarja 461 · Mallisarja 463 (mallit 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)

EinPAS 26 Aktiivinen turvajärjestelmä › 26.20 Jarru-/ pidonhallintajärjestelmä › 26.20.12 Tunnistin/katkaisin/johtosarja — Mallisarja 461 · Mallisarja 463 (mallit 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)

Koskee myös moottoreita/vaihteistoja: 741 171, 741 52*, 741 53*, 748 ***

AR42.30-P-0160GH

Remove/install ABS measuring ring

03.02.2020

Model

461 with rear axle 741.171/52/53

Model

463 (except 463.270/271) with rear axle 748

up to model year 2013

Remove/install ABS measuring ring

1

Measuring ring for anti-lock braking system (ABS)

2

Drive shaft

P42.30-0321-01

Remove/install

1

Disassemble drive shaft (2) on front axle


Model 461 (except 461.331) with rear axle 741.171/52/53
Model 463 (except 463.270/271) with rear axle 748
up to model year 2013
except code ZQ0 (G 500 4x42)

AR33.30-P-0700A

Model 461.331 with rear axle 741.171/53

AR33.30-P-0700GX

2

Clamp drive shaft (2) into place

3

Grind down ABS measuring ring (1) using straight grinder to 2 mm then separate using chisel (arrow)


Do not damage axle shaft (2).
Otherwise, the ABS measuring ring (1) may not be correctly seated.

4

Press on new ABS measuring ring (1)

Heat up ABS measuring ring (1) to approx. 80 °C then press on using a suitable tool.

5

Install in the reverse order

Viitatut asiakirjat