Checking alignment of rear axle carrier (removed)

AR40.30-P-0410B

Checking alignment of rear axle carrier (removed)

15.2.95



Removing, installing

1

Remove, install rear axle

AR35.10-P-0010A

2

Remove, install rubber mount of rear axle suspension

AR35.10-P-0040A



Measuring

3

Set up Celette straightening bench modular members

4

Install and secure checking fixtures (047a, 047b) in the supports of the Celette straightening bench

 Checking fixtures

*140589142300

5

Place rear axle carrier complete (with axle halves) or as an individual part on the checking fixtures (047a, 047b)

*BE40.30-P-1001-07A

6

Measure dimension "L1-L3"

 Insert checking pins (049) in respective reference holes and fix with screws. Do not tighten checking pins to permit aligning the centering holes when measuring.

Insert checking pins (L=58 mm) in fixtures of spring links, checking pins (L=38 mm) in fixtures of camber struts/thrust arms

*BE40.30-P-1001-04A

 Checking pins

*124589212100

 Telescopic measuring rod

*124589011900

 Telescopic measuring rod

*124589021900

Number

Designation

Model 140

BE40.30-P-1001-07A

Distance between the fixture bowl of the rear axle carrier and checking fixture

mm

5

Number

Designation

Model 140

BE40.30-P-1001-04A

Dim-ensi-on

Camber strut "L1"

mm

8562

Spring link "L2"

mm

5302

Thrust arm "L3"

mm

7962

See figure

AR40.30-P-0410B