Model | 906.63/73 |
with code ZU7 (National version for Canada) | |
except code ZG1 (Engageable all-wheel drive) | |
except code ZG3 (Engageable all-wheel drive with gear reduction) | |
Model | 906.63/73 |
with code ZU8 (National version for USA) | |
except code ZG1 (Engageable all-wheel drive) | |
except code ZG3 (Engageable all-wheel drive with gear reduction) |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.63/73 with code ZU7 except code ZG1/ZG3, model 906.63/73 with code ZU8 except code ZG1/ZG3 | ||
BE40.20-D-1001-13A | Permissible difference in front axle camber | between left and right sides of vehicle | ° | 0°20' |
For adjustment | ° | 0°10' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.63/73 with code ZU7 except code ZG1/ZG3, model 906.63/73 with code ZU8 except code ZG1/ZG3 | ||||
BE40.20-D-1006-13A | Camber with front-axle load of 1800 kg | or for transverse control arm angle | ° | 8,4 | ||
Permissible camber value | Min. | ° | 0°-35' | |||
max. | ° | 0°5' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-25' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-35' | |||
For significant wear on outside shoulder of tire | ° | 0°-35' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.63/73 with code ZU7 except code ZG1/ZG3, model 906.63/73 with code ZU8 except code ZG1/ZG3 | ||||
BE40.20-D-1007-13A | Camber with front-axle load of 1750 kg | or for transverse control arm angle | ° | 9 | ||
Permissible camber value | Min. | ° | 0°-28' | |||
max. | ° | 0°12' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-18' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-28' | |||
For significant wear on outside shoulder of tire | ° | 0°-28' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.63/73 with code ZU7 except code ZG1/ZG3, model 906.63/73 with code ZU8 except code ZG1/ZG3 | ||||
BE40.20-D-1008-13A | Camber with front-axle load of 1700 kg | or for transverse control arm angle | ° | 9,7 | ||
Permissible camber value | Min. | ° | 0°-21' | |||
max. | ° | 0°19' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-11' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-21' | |||
For significant wear on outside shoulder of tire | ° | 0°-21' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.63/73 with code ZU7 except code ZG1/ZG3, model 906.63/73 with code ZU8 except code ZG1/ZG3 | ||||
BE40.20-D-1009-13A | Camber with front-axle load of 1650 kg | or for transverse control arm angle | ° | 10,3 | ||
Permissible camber value | Min. | ° | 0°-14' | |||
max. | ° | 0°26' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-4' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-14' | |||
For significant wear on outside shoulder of tire | ° | 0°-14' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.63/73 with code ZU7 except code ZG1/ZG3, model 906.63/73 with code ZU8 except code ZG1/ZG3 | ||||
BE40.20-D-1010-13A | Camber with front-axle load of 1600 kg | or for transverse control arm angle | ° | 10,9 | ||
Permissible camber value | Min. | ° | 0°-6' | |||
max. | ° | 0°34' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°4' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-6' | |||
For significant wear on outside shoulder of tire | ° | 0°-6' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.63/73 with code ZU7 except code ZG1/ZG3, model 906.63/73 with code ZU8 except code ZG1/ZG3 | ||||
BE40.20-D-1011-13A | Camber with front-axle load of 1550 kg | or for transverse control arm angle | ° | 11,5 | ||
Permissible camber value | Min. | ° | 0°2' | |||
max. | ° | 0°42' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°12' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°2' | |||
For significant wear on outside shoulder of tire | ° | 0°2' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.63/73 with code ZU7 except code ZG1/ZG3, model 906.63/73 with code ZU8 except code ZG1/ZG3 | ||||
BE40.20-D-1012-13A | Camber with front-axle load of 1500 kg | or for transverse control arm angle | ° | 12,1 | ||
Permissible camber value | Min. | ° | 0°9' | |||
max. | ° | 0°49' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°19' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°9' | |||
For significant wear on outside shoulder of tire | ° | 0°9' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.63/73 with code ZU7 except code ZG1/ZG3, model 906.63/73 with code ZU8 except code ZG1/ZG3 | ||||
BE40.20-D-1013-13A | Camber with front-axle load of 1450 kg | or for transverse control arm angle | ° | 12,7 | ||
Permissible camber value | Min. | ° | 0°17' | |||
max. | ° | 0°57' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°27' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°17' | |||
For significant wear on outside shoulder of tire | ° | 0°17' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.63/73 with code ZU7 except code ZG1/ZG3, model 906.63/73 with code ZU8 except code ZG1/ZG3 | ||||
BE40.20-D-1014-13A | Camber with front-axle load of 1400 kg | or for transverse control arm angle | ° | 13,4 | ||
Permissible camber value | Min. | ° | 0°25' | |||
max. | ° | 1°5' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°35' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°25' | |||
For significant wear on outside shoulder of tire | ° | 0°25' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.63/73 with code ZU7 except code ZG1/ZG3, model 906.63/73 with code ZU8 except code ZG1/ZG3 | ||||
BE40.20-D-1015-13A | Camber with front-axle load of 1350 kg | or for transverse control arm angle | ° | 14 | ||
Permissible camber value | Min. | ° | 0°34' | |||
max. | ° | 1°14' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°44' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°34' | |||
For significant wear on outside shoulder of tire | ° | 0°34' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.63/73 with code ZU7 except code ZG1/ZG3, model 906.63/73 with code ZU8 except code ZG1/ZG3 | ||||
BE40.20-D-1016-13A | Camber with front-axle load of 1300 kg | or for transverse control arm angle | ° | 14,6 | ||
Permissible camber value | Min. | ° | 0°42' | |||
max. | ° | 1°22' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°52' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°42' | |||
For significant wear on outside shoulder of tire | ° | 0°42' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.63/73 with code ZU7 except code ZG1/ZG3, model 906.63/73 with code ZU8 except code ZG1/ZG3 | ||||
BE40.20-D-1017-13A | Camber with front-axle load of 1250 kg | or for transverse control arm angle | ° | 15,2 | ||
Permissible camber value | Min. | ° | 0°51' | |||
max. | ° | 1°31' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 1°1' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°51' | |||
For significant wear on outside shoulder of tire | ° | 0°51' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.63/73 with code ZU7 except code ZG1/ZG3, model 906.63/73 with code ZU8 except code ZG1/ZG3 | ||||
BE40.20-D-1018-13A | Camber with front-axle load of 1200 kg | or for transverse control arm angle | ° | 15,9 | ||
Permissible camber value | Min. | ° | 0°59' | |||
max. | ° | 1°39' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 1°9' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°59' | |||
For significant wear on outside shoulder of tire | ° | 0°59' |
1 | Note down the permissible camber value in the table based on the determined front-axle level. |
2 | Compare the permissible camber value against the actual value from the wheel alignment check. |
Observe permissible difference in front axle camber between right and left sides of the vehicle. |
3 | Determine level of wear on outside shoulder of tire. |
For an actual value within the permissible camber value and with wear on outside shoulder of the tire. |
If the difference between the inner and outer tire tread channel depth is greater than 2 mm, there is a high level of wear on the outside shoulder of the tire. |
4 | Take adjustment value from table and note down. |