Inter-axle lock
Número | Denominação | Rear axles 743.104/106/132, 743.143/149/153, 746.890 | Rear axles 741.93, 741.95, 745.520/525/590 | |||
BE35.40-B-1001-01A | Clearance between the coupling sleeve and the longitudinal differential drive gear | mm | 0.5 | 0.5 | ||
B35.40-0007-01
Check
1 Install a M18x1.5 (3) screw to the longitudinal lock drive cylinder.
2 Totally engage the sliding coupling sleeve (1) applying torque to the screw until the longitudinal lock is engaged.
3 Measure with a feeler gauge the axial slack between the sliding coupling sleeve (1) tooth and the tooth root from the countershaft gear (2) coupling gripper.
B35.40-0001-01
Adjust
4 If the axial slack between the sliding coupling sleeve and the coupling gripper is not correct, release the nut (4) and carry out the regulation tightening or loosing the adjusting screw (3) at the drive axle (5).
5 After regulation, tighten the nut (4) to block the adjusting screw (3).