Remove/install front stabilizer bar link rod

AR32.35-P-3328T

Remove/install front stabilizer bar link rod

2.5.06

7.10.04

If the rubber boot of the stabilizer bar pivot bushing is damaged, the stabilizer bar pivot bushing (and not the spring control arm) has to be replaced.

3rd stage

 

Remove/install



Notes on self-locking nuts and bolts

AH00.00-N-0001-01A



When working on the front-end assembly, be careful not to scratch, mark or notch the surfaces of aluminum parts. Otherwise the service life of the parts will be affected

 Installation

Tighten nuts and bolts of chassis components only when vehicle is in the ready-to-drive condition.

1

Lift vehicle on lifting platform.

AR00.60-P-1000T

2

Unscrew nut (23a) of link rod (23) from stabilizer bar pivot bushing

 Do not damage rubber boot of stabilizer bar pivot bushing.

 If damaged, replace stabilizer bar pivot bushing.

AR32.20-P-0310M



*BA32.20-P-1006-02B

3

Unscrew nut (23b) of link rod (23) from stabilizer bar using  box wrench bit

 To do so, counterhold threaded bolt with shortened Allen wrench (shop-made). Turn steering if necessary.

 Installation: Replace self-locking nut (23b).



*BA32.20-P-1002-02B



*000589109900

4

Remove link rod (23) of torsion bar

5

Install in the reverse order

Number

Designation

Model
211
except
model
211.08/09/28/29

BA32.20-P-1002-02B

Self-locking nut of connecting rod to torsion bar

M10

Nm

-

M101.5

Nm

-

M121.5

Nm

-

M141.5

Nm

130

BA32.20-P-1006-02B

Self-locking nut, link rod to joint piece

Nm

130