ar2760d140501a

Adjustment of modulating pressure with non-adjustable cap

Tyyppi ar · aihe 27.60 · versio 0104 · 1999-08-23

Koskee: TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943 TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980 TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979 TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943 with CODE (Z22) Freight delivery service for post office TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980 with CODE (ZB2) Fedex supply

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 2 Alusta › 27 Automaattivaihteisto › 27.60 Vaihteensiirto, vaihtamisen ohjaus — Mallisarja 601 (mallit 943) · Mallisarja 602 (mallit 980) · Mallisarja 901 (mallit 06*, 3**, 4**) · Mallisarja 902 (mallit 0**, 3**, 4**) · Mallisarja 903 (mallit 0**, 3**, 312, 362, 4**, 462, 463) · Mallisarja 904 (mallit 0**, 4**)

EinPAS 17 Voimansiirtolinja/akseli › 17.20 Vaihteisto › 17.20.80 Vaihteisto täydellinen — Mallisarja 601 (mallit 943) · Mallisarja 602 (mallit 980) · Mallisarja 901 (mallit 06*, 3**, 4**) · Mallisarja 902 (mallit 0**, 3**, 4**) · Mallisarja 903 (mallit 0**, 3**, 312, 362, 4**, 462, 463) · Mallisarja 904 (mallit 0**, 4**)

Koskee myös moottoreita/vaihteistoja: 111 979, 722 330, 722 332, 722 337, 722 375, 722 376

AR27.60-D-1405-01A

Adjustment of modulating pressure with non-adjustable cap

Adjustment of modulating pressure with non-adjustable cap

D27.60-0017-01

1 Remove cap on vacuum unit.

Adjustment of modulating pressure with non-adjustable cap

D27.60-0018-01

2 Pull adjusting key out of the locking cap until it can be rotated.

One clockwise rotation results in a pressure increase of 0.4 bar
One counterclockwise rotation results in a pressure reduction of 0.4 bar
To facilitate the work, the modulating pressure can be adjusted at idle speed when the vehicle is stationary

Adjustment of modulating pressure with non-adjustable cap

D27.60-0015-01

3 Adjustment process:
-Check and record modulating pressure at idle speed when the vehicle is stationary
-Check and record modulating pressure (at wide open throttle at 50 km/h)
-Compensate the calculated pressure difference when the vehicle is stationary (at idle speed).
- After the adjustment process, check the modulating pressure (at wide open throttle at 50 km/h) again and repeat the adjustment process if necessary.

Adjustment of modulating pressure with non-adjustable cap

D27.60-0016-01

4 After adjusting, press the cap onto the vacuum unit.