ar2750d088002a

Insert/measure multi-disk pack B2

Tyyppi ar · aihe 27.50 · versio 0106 · 2014-03-10

Koskee: TRANSMISSION 722.681 in MODEL 902.6, 903.6, 904.6, 905.6 TRANSMISSION 722.683 in MODEL 906.1/2/6/7 TRANSMISSION 722.684 in MODEL 906.1/2/6/7 TRANSMISSION 722.685 in MODEL 906.1/2/6/7 TRANSMISSION 722.686 in MODEL 906.1/2/6/7

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 2 Alusta › 27 Automaattivaihteisto › 27.50 Pyöräpari — Mallisarja 902 (mallit 6**) · Mallisarja 903 (mallit 6**) · Mallisarja 904 (mallit 6**) · Mallisarja 905 (mallit 6**) · Mallisarja 906 (mallit 1**, 2**, 6**, 7**)

EinPAS 17 Voimansiirtolinja/akseli › 17.20 Vaihteisto › 17.20.54 Lamellijarru/lamellikytkin — Mallisarja 902 (mallit 6**) · Mallisarja 903 (mallit 6**) · Mallisarja 904 (mallit 6**) · Mallisarja 905 (mallit 6**) · Mallisarja 906 (mallit 1**, 2**, 6**, 7**)

Koskee myös moottoreita/vaihteistoja: 722 681, 722 683, 722 684, 722 685, 722 686

AR27.50-D-0880-02A

Insert/measure multi-disk pack B2

Automatic transmission fluids (ATF, Sheet 236.10)

Transmission 722.681

BB00.40-P-0236-10A

Automatic transmission fluids (ATF, Sheet 236.12)

Transmission 722.683/684/685/686

BB00.40-P-0236-12A

TRANSMISSION

722.681 in MODEL 902.6, 903.6, 904.6, 905.6

TRANSMISSION

722.683 in MODEL 906.1/2/6/7

TRANSMISSION

722.684 in MODEL 906.1/2/6/7

TRANSMISSION

722.685 in MODEL 906.1/2/6/7

TRANSMISSION

722.686 in MODEL 906.1/2/6/7

Test and adjustment values

Number

Designation

TRANSMISSION 722.681
## up to 3947439

TRANSMISSION 722.681
## as of 3947440

BE27.51-N-1002-01A

Disk play of multidisk brake B2

mm

3,00...3,40

3,00...3,40

Test and adjustment values

Number

Designation

TRANSMISSION 722.683

TRANSMISSION 722.684

BE27.51-N-1002-01A

Disk play of multidisk brake B2

mm

2,00...2,40

2,00...2,40

Test and adjustment values

Number

Designation

TRANSMISSION 722.685

TRANSMISSION 722.686

BE27.51-N-1002-01A

Disk play of multidisk brake B2

mm

2,00...2,40

2,00...2,40

Insert/measure multi-disk pack B2

208 589 00 21 00

Pressing tool

Insert/measure multi-disk pack B2

Design of multidisk brake

1

Retaining ring

2

External plate (6.5 mm)

3

External plates (1.8 mm)

4

Internal plates

5

External plate (1.8 mm)

6

Disk spring

13

Piston B2

15

Piston B3 (external plate carrier B2)

L

Toothed plate play

D27.50-1116-01

1

Put together external plates (2, 3, 5) and internal plates (4) in the sequence shown and insert individually.

Place new external and internal plates in automatic transmission fluid for 1 h before installation.

Insert/measure multi-disk pack B2

2

Install retaining ring (1).


Both ends of retaining ring (1) must be seated on a lug of the piston B3 (15) (arrows).


D27.50-1134-01

Insert/measure multi-disk pack B2

3

Mount pressure device on external plate (2).



4

Press disk pack together as far as the end stop using pressure device and a workshop press.


The marking ring (bottom arrow) must still be visible.



5

Using a feeler gauge, Check plate play (L) at three points between retaining ring (1) and external plate (2).


To measure the toothed plate play (L) the circlip (1) must abut with the upper contact surface of the groove.
If necessary, adjust the plate play (L) by installing a retaining ring (1) of corresponding thickness.


D27.50-1117-03

Viitatut asiakirjat