ar2740s070002e

Remove/install heat shield on transmission

Tyyppi ar · aihe 27.40 · versio 0101 · 2020-07-20

Koskee: Transmission 725.0 in model 447, 448

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 2 Alusta › 27 Automaattivaihteisto › 27.40 Kotelo — Mallisarja 447 · Mallisarja 448

EinPAS 35 Kori/runko/liittyvät osat › 35.25 Vaimennuselementti/verhouksen alaosa/tiiviste/alustasuoja › 35.25.40 Vaimennus/suojaus/vaimennusmatto — Mallisarja 447 · Mallisarja 448

Koskee myös moottoreita/vaihteistoja: 725 0**

AR27.40-S-0700-02E

Remove/install heat shield on transmission

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Transmission

725.0 in model 447, 448

Automatic transmission complete

Number

Designation

Transmission 725.0 in model 447

BA27.10-N-1008-06EA

Bolt, leaf spring for heat shield to transmission housing

Nm

5

Automatic transmission complete

Number

Designation

Transmission 725.0 in model 447

BA27.10-N-1009-06EA

Bolt, heat shield to oil pan

Nm

9

Remove/install heat shield on transmission

S27.40-A000-76

Remove

1

Unclip electrical wiring harness (2) from heat shield (1) (arrow).

2

Remove screw (3) and remove heat shield (1) downward.

3

Remove screw (4) and remove leaf spring (5).

If the automatic transmission is replaced.

Install

4

Attach leaf spring (5) to automatic transmission.

If the automatic transmission has been replaced.

5

Screw in and tighten screw (4)  .

If the automatic transmission has been replaced.

6

Slide heat shield (1) under leaf spring (5).

7

Screw in and tighten screw (3)  .

8

Attach electrical wiring harness (2) to heat shield (1) (arrow).

Viitatut asiakirjat