ar2650d474302a

Check play between grooved ball bearing and retaining ring on the input shaft

Tyyppi ar · aihe 26.50 · versio 0101 · 2011-06-30

Koskee: TRANSMISSION 711.680 in MODEL 906 TRANSMISSION 711.685 in MODEL 906 TRANSMISSION 711.680 in MODEL 900

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 2 Alusta › 26 Mekaaninen vaihteisto › 26.50 Pyöräpari, akselit — Mallisarja 900 · Mallisarja 906

EinPAS 17 Voimansiirtolinja/akseli › 17.20 Vaihteisto › 17.20.50 Akseli/hammaspyörä/synkronointi — Mallisarja 900 · Mallisarja 906

Koskee myös moottoreita/vaihteistoja: 711 680, 711 685

AR26.50-D-4743-02A

Check play between grooved ball bearing and retaining ring on the input shaft

Gear set adjustment values

Number

Designation

Transmission
711.680

Transmission
711.685

BE26.50-N-1006-01D

Axial play between drive shaft bearing and retaining ring

mm

0.02 to 0.08

0.02 to 0.08

Check play between grooved ball bearing and retaining ring on the input shaft

W26.50-0013-02

1 Use feeler gauge to check axial play (B) between retaining ring (1) and grooved ball bearing (2).

2 Remove retaining ring (1) and measure; then install a new retaining ring (1) with appropriate thickness.

Transmission 711.680: Retaining rings (1) are available in thicknesses of 1.70 to
2.15 mm in 0.05 mm steps.

Transmission 711.685: Retaining rings (1) are available in thicknesses of 1.80 to
2.00 mm in 0.05 mm steps.