ar1530p7100gi

Remove starter, install

Tyyppi ar · aihe 15.30 · versio 0202 · 2012-02-16

Koskee: ENGINE 111.977 in MODEL 163.136 ENGINE 612.963 in MODEL 163.113

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 1 Moottori › 15 Moottorin sähkölaitteet › 15.30 Käynnistinmoottori — Mallisarja 163 (mallit 113, 136)

EinPAS 15 Moottori › 15.35 Käynnistinmoottori › 15.35.20 Käynnistinmoottori — Mallisarja 163 (mallit 113, 136)

Koskee myös moottoreita/vaihteistoja: 111 977, 612 963

AR15.30-P-7100GI

Remove starter, install

15.2.12

ENGINE 111.977 in MODEL 163.136

ENGINE 612.963 in MODEL 163.113

Remove starter, install

P15.30-2017-06

Shown on engine 612

1 Electric cable circuit 30

2 Electric cable circuit 50

3 Bolts

M1 Starter

Modification notes

3.9.03

Check ring gear, newly recorded

Step 6

Remove/Install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Dismount ground line to the battery

Insulate ground line as a protection against unintentional contact of dismounted ground line with ground point of battery.

AR54.10-P-0003A

Notes on battery

AH54.10-P-0001-01A

2

Remove fender liner in left front fender

AR88.10-P-1300GH

3

Dismount electrical lines (1, 2)

Engine 111

*BA15.30-P-1001-01A

Engine 111

*BA15.30-P-1002-01A

Engine 612

*BA15.30-N-1001-01G

Engine 612

*BA15.30-N-1002-01G

4

Unscrew bolts (3)

Engine 111

*BA15.30-P-1003-01A

Engine 612

*BA15.30-N-1003-01G

5

Take out starter (M1)

6.1

Check ring gear at flywheel for wear and damage

When replacing the starter on vehicles fitted with manual transmission

Rotate engine at the crankshaft in direction of rotation.

6.2

Check ring gear on the drive plate for wear and damage

When replacing the starter on vehicles fitted with automatic transmission

Rotate engine at the crankshaft in direction of rotation.

7

Install in the reverse order

8

Perform function check

9

Render electrical system operational

See

Perform basic programming

AR00.19-P-0200GH

10

Read diagnostic trouble code memory and erase

When the work is complete stored faults must be worked on in the diagnostic trouble code memories and erased.

Connect STAR DIAGNOSIS, interrogate fault memory

AD00.00-P-2000-04A

Starter

Number

Designation

Engine 103, 104, 111, 120

BA15.30-P-1001-01A

Nut of connection of circuit 30

Nm

14

BA15.30-P-1002-01A

Nut of connection circuit 50

Nm

6

BA15.30-P-1003-01A

Bolt of starter to crankcase

Nm

42

Starter

Number

Designation

Engine 612.961/
962/963/
967

BA15.30-N-1001-01G

Bolt of starter to crankcase

Nm

42

BA15.30-N-1002-01G

Nut of connection of circuit 30

Nm

14

BA15.30-N-1003-01G

Nut of connection circuit 50

Nm

6

Viitatut asiakirjat