ar0941w2007j

Remove/install boost pressure/charge air temperature sensor

Tyyppi ar · aihe 09.41 · versio 0106 · 2011-11-04

Koskee: ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976 ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5 ENGINES 902.9 in MODEL 957 except CODE (MS8) Natural gas engine ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976 ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976 ENGINES 925.9 in MODELS 970, 972, 974 ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2 ENGINES 926.9 in MODEL 958.0

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 1 Moottori › 09 Imuilmanotto, ahtaminen › 09.41 Ahtoilmaputki/välijäähdytys — Mallisarja 375 (mallit 1**, 3**) · Mallisarja 900 (mallit 9**) · Mallisarja 902 (mallit 9**) · Mallisarja 950 (mallit 5**, 6**) · Mallisarja 952 (mallit 5**, 6**) · Mallisarja 953 (mallit 6**) · Mallisarja 954 (mallit 5**) · Mallisarja 957 · Mallisarja 958 (mallit 0**, 2**) · Mallisarja 970 · Mallisarja 972 · Mallisarja 974 · Mallisarja 975 · Mallisarja 976

EinPAS 15 Moottori › 15.30 Imuilmanotto/ahtaminen › 15.30.12 Tunnistin/katkaisin/johtosarja — Mallisarja 375 (mallit 1**, 3**) · Mallisarja 900 (mallit 9**) · Mallisarja 902 (mallit 9**) · Mallisarja 950 (mallit 5**, 6**) · Mallisarja 952 (mallit 5**, 6**) · Mallisarja 953 (mallit 6**) · Mallisarja 954 (mallit 5**) · Mallisarja 957 · Mallisarja 958 (mallit 0**, 2**) · Mallisarja 970 · Mallisarja 972 · Mallisarja 974 · Mallisarja 975 · Mallisarja 976

Koskee myös moottoreita/vaihteistoja: 924 9**, 925 9**, 926 9**

AR09.41-W-2007J

Remove/install boost pressure/charge air temperature sensor

3.11.11

ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976

ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5

ENGINES 902.9 in MODEL 957 except CODE (MS8) Natural gas engine

ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976

ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976

ENGINES 925.9 in MODELS 970, 972, 974

ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2

ENGINES 926.9 in MODEL 958.0

Remove/install boost pressure/charge air temperature sensor

W09.41-1038-08

Shown on engine 900.9 with code (MS4) BlueTec 4

1 Electrical connector

2 Cap

B111 Charge air temperature and boost pressure combination sensor

3 Charge air manifold

Remove/install

1

Switch off ignition

Danger!

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut.

AS60.80-Z-0001-01A

2

Tilt cab

Notes on tilting the cab

AH60.80-N-0003-01A

3

Take off cover (2) at charge air manifold (3)

4

Disconnect electrical connector (1)

5

Remove charge air temperature and boost pressure combination sensor (B111)

Installation: Clean sealing surfaces.

*BA09.41-N-1008-01B

6

Install in the reverse order

Charge air pipe/charge air cooling

Number

Designation

Engine
900.9
in model 375, 970, 972, 975, 976

Engine
902.9
in model 375, 970, 972, 974, 975, 976

Engine
902.9
in model 375, 950, 952, 953, 954

Engine
902.9, 906.9, 926.9 in Model 957

BA09.41-N-1008-01B

Bolt, charge air temperature and charge pressure combination sensor to charge air manifold

Nm

10

10

10

Charge air pipe/charge air cooling

Number

Designation

Engine
924.9
in model 375, 958, 970, 972, 974, 975, 976

Engine
925.9
in models 970, 972, 974, 975, 976

Engine
926.9
in model 950, 952, 953, 954, 958

BA09.41-N-1008-01B

Bolt, charge air temperature and charge pressure combination sensor to charge air manifold

Nm

10

10

10

Viitatut asiakirjat