sm2000p0011a

Check mixing ratio of antifreeze (code: 19P2094006)

Type sm · topic 20.00 · version 0100 · 2019-07-18

Applies to: Model 166

Where it sits

Function group 1 Engine › 20 Engine cooling system › 20.00 General — Series 166

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.5 Coolant circuit, complete — Series 166

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.40 Service measures — Series 166

SM20.00-P-0011A

Check mixing ratio of antifreeze (code: 19P2094006)

14.07.2019

Model

166

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

02-2969

Check mixing ratio of coolant and antifreeze

P

02-2970

Replace coolant with antifreeze protection (after check)

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Topical note

Notes on coolant

AH20.00-N-2080-01A

Notes on coolant level

AH20.00-P-1142-01CW

Check

1

Check, whether the vehicle is affected by the measure.


Model 166 as of 118541 up to 145268

SM20.00-P-0011-01AAA

2

Check mixing ratio of coolant and antifreeze.

The findings report from the scope of testing must be recorded in written form on the workshop order and then stored in a tamperproof manner.

The antifreeze content of the coolant and antifreeze protection should be between -33 °C and -45 °C!

Antifreeze content lies between ­33 °C and ­45 °C.

End the measure.

Antifreeze content does not lie between ­33 °C and ­45 °C.

Continue with operation step 3.

Install

3

Replace coolant with antifreeze protection.

AP20.00-P-2080EW

Parts ordering note

Part no.

Designation

Quantity

A 000 989 28 25 09

Antifreeze - RED G40 - 1.5l

Referenced documents