si6000p0015a

Service Information: Introduction of 2-component epoxy body filler

Type si · topic 60.00 · version 0100 · 2015-06-30

Applies to: Model all

Where it sits

Function group 3 Body › 60 Body - general › 60.00 General — Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 918, 919, 924, 925, 938, 943, 957) · Series 906 (models 917, 918, 924, 953)

EinPAS 35 Body/frame/detachable parts › 35.20 Cab/body › 35.20.1 Basic information — Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 918, 919, 924, 925, 938, 943, 957) · Series 906 (models 917, 918, 924, 953)

EinPAS 35 Body/frame/detachable parts › 35.21 Frame › 35.21.1 Basic information — Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 918, 919, 924, 925, 938, 943, 957) · Series 906 (models 917, 918, 924, 953)

EinPAS 35 Body/frame/detachable parts › 35.30 Front end › 35.30.1 Basic information — Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 918, 919, 924, 925, 938, 943, 957) · Series 906 (models 917, 918, 924, 953)

EinPAS 35 Body/frame/detachable parts › 35.31 Rear panel/rear end › 35.31.1 Basic information — Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 918, 919, 924, 925, 938, 943, 957) · Series 906 (models 917, 918, 924, 953)

EinPAS 35 Body/frame/detachable parts › 35.32 Substructure › 35.32.1 Basic information — Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 918, 919, 924, 925, 938, 943, 957) · Series 906 (models 917, 918, 924, 953)

EinPAS 35 Body/frame/detachable parts › 35.34 Sidewall › 35.34.1 Basic information — Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 918, 919, 924, 925, 938, 943, 957) · Series 906 (models 917, 918, 924, 953)

EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.1 Basic information — Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 918, 919, 924, 925, 938, 943, 957) · Series 906 (models 917, 918, 924, 953)

EinPAS 35 Body/frame/detachable parts › 35.36 Hood/flap/cover › 35.36.1 Basic information — Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 918, 919, 924, 925, 938, 943, 957) · Series 906 (models 917, 918, 924, 953)

EinPAS 35 Body/frame/detachable parts › 35.37 Fender › 35.37.1 Basic information — Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 918, 919, 924, 925, 938, 943, 957) · Series 906 (models 917, 918, 924, 953)

EinPAS 35 Body/frame/detachable parts › 35.39 Roof › 35.39.1 Basic information — Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 918, 919, 924, 925, 938, 943, 957) · Series 906 (models 917, 918, 924, 953)

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.20 Service information — Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 918, 919, 924, 925, 938, 943, 957) · Series 906 (models 917, 918, 924, 953)

Also applies to engines/gearboxes: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

SI60.00-P-0015A

Service Information: Introduction of 2-component epoxy body filler

26.6.15

Model

all

Please remember that with immediate effect a 2­component epoxy basic body filler with part number A 012 989 29 71 is available and can be ordered through the GLC. Below is some advance information on the application areas and properties.

Applications

Repair of surfaces and tinned transitions

For part replacement when rectifying unevenness

For part replacement when tinning in seam area

For part replacement without tinning in seam area (only in combination with adhesive kit A 012 989 17 71)

Properties

Easy application through static mixer

Application without primer

Easy process capability and grinding capability

Resistant to high pressure, nonshrinking

Thixotropic set (i.e., the flowability changes to match externally-applied influences)

Free of solvents, PVC and isocyanates

Usable up to a maximum coat thickness of 2 mm

Pot life (processability duration) of 60 to 90 min.

Both forced hardening (1 h at 60 to 65 °C) as well as air dehumidification possible (8 to 24 h at interior temperature)

Ground

Bright or zinc galvanized steel

Aluminum

Parts ordering note

Part no.

Designation

Quantity

A 012 989 17 71

glue kit

A 012 989 29 71

2 component epoxy basic body filler