GF82.95-P-2002TM | Status indicator, location/function | 22.7.08 |
MODEL 211.0 /2
with CODE (359) TELE AID emergency call system
with CODE (494) USA version
In the event of a crash the system operates automatically!
The system is activated manually by pushing the SOS switch (S93/3s1). This can be the case in emergency situations of if an accident is observed. Activation of the emergency call system is shown by the flashing red light emitting diode (LED) in the SOS switch. If there is no answer from the occupants when the emergency center calls the vehicle, a search and rescue mission by the local emergency team is started immediately. If the emergency call system is unable to connect to the emergency call center, or if the subscriber identification module (SIM) card is not authorized, the system automatically calls the police emergency number "911" and attempts to set up a handsfree connection. In such an event, data transfer does not take place using the Short Message Service (SMS).
-----------------------------------------------------------------------------------------
SOS switch
The SOS switch is covered with a protective lid labeled in red. The lid is labeled "SOS". Pressing the protective lid unlocks the lid, and it automatically opens with the aid of a spring mechanism. Pressing the SOS switch for longer than 0.5 s activates the system.
MB-Info and breakdown assistance button group (S93/6)
The MB-Info and breakdown assistance button group is located on the center console. The system is activated by pressing the MB-Info and breakdown assistance button group for longer than 0.5 s. Activation of the system is indicated by the flashing LED in the buttons. Pressing a button in the MB-Info and breakdown assistance button group automatically sends a message via SMS.
-----------------------------------------------------------------------------------------
While the SMS is transmitted, a telephone connection to the service center is set up.
Status reports
The status reports are issued in the display of the following components:
Radio (A2)
COMAND operating, display and controller unit (A40/3)
Multifunction display (A1p13) of instrument cluster (A1)
Referenced documents
- gf8295p3212tmb Emergency call system control unit, component description
- gf8295p4100tmu TELE AID control unit/task/design/function
- gf8295p4105tm Telediagnosis pushbutton switch(es), location/task
- gf8295p4107tm SOS switch, location/task/design/function