gf8261p2000b

Start-up/basic settings, function

Type gf · topic 82.61 · version 0102 · 1998-11-16

Applies to: MODEL 129, 140 as of 1.1.98, 168, 202, 208, 210.2, 210.0 as of 1.1.98 with CODE (351) Auto pilot system (APS) MODEL 129, 140 as of 1.1.98, 202, 208, 210.2, 210.0 as of 1.1.98 with CODE (815) Dynamic APS

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.61 Auto Pilot System (APS), Audio 30 APS — Series 129 · Series 140 · Series 168 · Series 202 · Series 208 · Series 210 (models 0**, 2**)

GF82.61-P-2000B

Start-up/basic settings, function

20.2.97

MODEL 129,
140 as of 1.1.98,
168, 202, 208, 210.2,
210.0 as of 1.1.98 with CODE (351) Auto pilot system (APS)

MODEL 129,
140 as of 1.1.98,
202, 208, 210.2,
210.0 as of 1.1.98 with CODE (815) Dynamic APS

Initial operation
After installation of a new navigation processor (A2/30) it is necessary to code the system. The coding can be accomplished with the hand-held tester (HHT). The following must be made when operated for the first time:

Vehicle data version coding

Vehicle model

Tire condition (new or used tires)

Component version coding

CD changer

Sound system

Telematic (dynamic guidance)

-----------------------------------------------------------------------------------------

Location
The location can be entered on the radio and navigation operating unit (A2/29) or automatically by means of GPS location finding (takes 2 – 20 min.).

The gyrosensor replaces the electronic compass (B26) on the first and second generation APS systems, therefore calibration of the compass is no longer required.
The gyrosensor is integrated into the navigation processor (A2/30).

The APS can be used only after it has been started up properly first.

-----------------------------------------------------------------------------------------

Auto pilot system (APS), instructions for operation

GF82.61-P-0001-03C

Wheel recalibration, function

GF82.61-P-3001B

System test, function

GF82.61-P-3004B

Navigation, function

GF82.61-P-2003B

Radio and navigation operating unit, location/purpose/design/function

GF82.61-P-4100B

VSS sensor, location/purpose/design/function

GF42.45-P-4550A

Auto pilot system navigation processor, location/purpose/design/function

GF82.61-P-4104A

Global positioning system (GPS) control module, location/purpose/design/function

GF82.61-P-4105B

Referenced documents