gf8050p2003d

Deactivating anti-theft alarm, function

Type gf · topic 80.50 · version 0105 · 1999-06-10

Applies to: MODEL 170 up to 31.5.98 with CODE (551a) Anti-theft alarm (ATA) MODEL 170 up to 31.5.98 with CODE (552a) Anti-theft alarm (ATA) for Switzerland

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.50 Anti-theft alarm system (ATA), Interior motion sensor/Tow sensor — Series 170

GF80.50-P-2003D

Deactivating anti-theft alarm, function

4.7.97

MODEL 170 up to 31.5.98 with CODE (551a) Anti-theft alarm (ATA)

MODEL 170 up to 31.5.98 with CODE (552a) Anti-theft alarm (ATA) for Switzerland

The anti-theft alarm (ATA) can be deactivated by

Unlocking the vehicle with the remote control key
(Infrared up to 5/97, as of 6/97 and radio)

Unlocking the vehicle with the mechanical key
(lock switch, , only).

Signal: lock switch 1 (SN1, 40Hz)

The PSE control module (combined functions) (A37) receives the instruction to "unlock the vehicle" via the CAN bus and then deactivates all alarm inputs.

The ATA is not deactivated when the vehicle is unlocked

with the interior switch (CL) (S6/1s2).

Deactivation of the ATA leads to termination of any alarm triggered previously.

The ATA is triggered when the vehicle is unlocked with the mechanical key, e.g. when a door is opened, if the vehicle was previously locked with the remote control key (except ).

Activating anti-theft alarm (ATA), function

GF80.50-P-2002E

Triggering anti-theft alarm (ATA), function

GF80.50-P-2004D

Referenced documents