gf8050p2004d

Tripping of anti-theft alarm (ATA), function

Type gf · topic 80.50 · version 0105 · 1999-06-10

Applies to: MODEL 170 up to 31.5.98 with CODE (551a) Anti-theft alarm system (ATA) MODEL 170 up to 31.5.98 with CODE (552a) Anti-theft alarm system (ATA) for Switzerland

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.50 Anti-theft alarm system (ATA), Interior motion sensor/Tow sensor — Series 170

GF80.50-P-2004D

Tripping of anti-theft alarm (ATA), function

4.7.97

MODEL 170 up to 31.5.98 with CODE (551a) Anti-theft alarm system (ATA)

MODEL 170 up to 31.5.98 with CODE (552a) Anti-theft alarm system (ATA) for Switzerland

The anti-theft alarm (ATA) is triggered when:

an exterior contact is actuated

the brake contact is actuated

the radio is removed (electrical connector disconnected)

the ignition is jumpered

the glove compartment is opened
(actuation of glove box switch (ATA) (S62/7)

On vehicles with code 882 it is also triggered by:

Anti-towing sensor (TS).

Assuming that the corresponding inputs are armed when the
ATA is activated.

The armed inputs are checked twice each second by the PSE control module (combined) (A37).

If two checks of the same input in sequence indicate that the input is not in the non-actuated state, the PSE control module triggers an acoustic as well as optical alarm.

Alarm triggering by exterior contact, function

GF80.50-P-3015D

Alarm triggering by brake contact, function

GF80.50-P-3016B

Alarm triggering by anti-towing sensor (TS), function

with code 882

GF80.50-P-3023B

Referenced documents