GF80.50-D-2003H | Deactivate anti-theft alarm system, function | 23.2.10 |
MODEL 906.111 /113 /131 /133 /135 /153 /155 /211 /213 /231 /233 /235 /253 /255 /611 /613 /631 /633 /635 /637 /653 /655 /657 /711 /713 /731 /733 /735
with CODE (FZ5) Anti-theft alarm system (ATA [EDW])
with CODE (FZ4) Anti-theft alarm system with interior protection and towing sensor
with CODE (FY1) ATA 2 with interior protection, towing sensor and battery-operated horn
Deactivation of the anti-theft alarm system (ATA) is possible with the "Unlock" transmit button on the transmitter key (A8/1) or by inserting the transmitter key into the EIS control unit (N73), i.e. "Circuit 15C ON" is activated. Deactivation of the ATA system is indicated by the turn signals flashing a number of times or after the LED in the interior central locking button (N72/1s7) goes out.
The message "Unlock" and "C.. 15C ON" from the EIS control unit is read in by the OCP control unit (N70) over the controller area network bus class B (interior compartment) (CAN-B).
The "ATA_ST (ATA status)" is transmitted by the OCP control unit to the UCP control unit (N72/1) via the CAN-B.
Termination of alarm by ATA system
When the "Unlock" button on the transmitter key is actuated, the alarm is interrupted and the ATA system deactivated. Deactivation is indicated by the turn signals flashing once and when the LED in the interior central locking button goes out.
The "Unlock" message from the EIS control unit is read in by the OCP control unit via the CAN-B.
The "ATA_ST (ATA status)" is transmitted by the OCP control unit to the UCP control unit via the CAN-B.
Upper control panel control unit, component description | |||
Front SAM control unit with fuse and relay module, component description | |||
Overhead control panel (DBE) control unit, component description | With CODE (LD0) Dome lamp with reading lamp on driver/passenger side | ||
Driver-side front door control unit, component description | |||
Electronic ignition/starter switch control unit (EZS), component description | Except code (ZU7) National version for Canada Except code (ZU8) National version for USA | ||
with CODE (ZU7) National version for Canada with CODE (ZU8) National version for USA * Only for USA, Canada, Mexico | |||
Transmitter key, component description | Model 906.1 Except code (ZU7) National version for Canada Except code (ZU8) National version for USA With 2 buttons Model 906.1 Except code (ZU7) National version for Canada Except code (ZU8) National version for USA With 3 buttons Model 906.2 With 2 buttons Model 906.2 With 3 buttons Model 906.6 Except code (ZU7) National version for Canada Except code (ZU8) National version for USA With 2 buttons Model 906.6 Except code (ZU7) National version for Canada Except code (ZU8) National version for USA With 3 buttons Model 906.7 Except code (ZU7) National version for Canada Except code (ZU8) National version for USA With 2 buttons Model 906.7 Except code (ZU7) National version for Canada Except code (ZU8) National version for USA With 3 buttons | ||
with CODE (ZU7) National version for Canada with CODE (ZU8) National version for USA * Only for USA, Canada, Mexico |
Referenced documents
- gf5421d6040h Upper control panel control unit, component description
- gf5421d6070h Front SAM control unit with fuse and relay module component description
- gf5421d6080h Overhead control panel (OCP [DBE]) control unit component description
- gf7229d6000h Driver-side front door control unit, component description
- gf8057d6000h Electronic ignition/starter switch control unit (EZS), component description
- gf8057d6000hu Electronic ignition/starter switch control unit (EIS), component description
- gf8057d6010ha Transmitter key, component description
- gf8057d6010hu Transmitter key, component description