Convenience closing/opening with lock switch, function

P82.40-0238-06

Networking

A37 Pneumatic system equipment (PSE)

CAN Controller area network

M10/3 Left front power window motor

M10/4 Right front power window motor)

M12/1 Sliding/tilting roof

N69/1 Driver front door control module

N69/2 Driver front door control module

N69/3 Rear driver side door control module

N69/4 Door control module rear passenger side

N70 Overhead control panel control module

N73 Electronic ignition switch (EIS) control module

S17/3 Left front door contact switch

S17/4 Right front door contact switch

S17/5 Left rear door switch

S17/6 Right rear door contact switch

S86/1 Left front lock switch

S88/2 Trunk lid lock switch

1 Transmitter key

Illustrated on model 210

Function prerequisites:

 no overvoltage/undervoltage

 circuit 15_off and circuit 15R_off

 all doors closed.

Convenience closing/opening on driver door with lock switch, function

When the left front lock switch (convenience) (S86/1) is actuated, the central locking function is triggered. Moreover, if the lock switch is pressed for longer than 5 seconds, the driver front door control module (N69/1) sends the convenience locking command to the CAN. The command is sent as long as the lock switch is operated. The control module

-----------------------------------------------------------------------------------------

for the overhead control panel (N70) then executes the tilting/sliding roof convenience closing function. The door control modules execute the power window convenience closing function.

Convenience closing/opening with lock switch, trunk lid

In this case, the trunk lid lock switch (convenience) (S88/2) is actuated and the CAN command sent by the pneumatic system equipment (PSE), combination functions (A37).

When the "Unlock vehicle" button is pressed, the corresponding convenience opening functions are executed.

-----------------------------------------------------------------------------------------