GF77.20-P-2001A | Convenience closing of tilting/sliding roof function | 7.12.96 |
MODELS 202 as of 1.6.97,
208, 210.081 /281 (except 208.4),
210 (except 210.081 /281) as of 1.3.97
Function prerequisites
no overvoltage/undervoltage
circuit 15 off and
circuit 15R off and
circuit 15C off detected
Function
The convenience closing function of the tilting/sliding roof is only available in the normalized state. The overhead control panel control module (N70) receives over CAN the request for convenience closing of the tilting/sliding roof and then actuates the tilting/sliding roof motor (M12/1).
-----------------------------------------------------------------------------------------
The direction in which the motor is actuated depends on whether the sliding roof or the tilting roof is open.
The motor is actuated until the overhead control panel control module (N70) through the position measurement detects that the tilting/sliding roof is closed.
The function is aborted if
the request over CAN is no longer received or
lock-up of the tilting/sliding roof is detected or
the function requirements listed above are no longer satisfied.
-----------------------------------------------------------------------------------------
Referenced documents
- gf7720p0001a Power tilting/sliding roof (SR [SHD]) function
- gf7720p2002a Close tilting/sliding roof function
- gf7720p3000a Sliding/pop-up roof lock-up recognition, function
- gf7720p3001a Sliding/pop-up roof position measurement, function
- gf7720p3002a Sliding/pop-up roof synchronization, function
- gf8045p0003a Convenience feature (CF), function