gf6850p2002pc

Close function

Type gf · topic 68.50 · version 0101 · 2008-04-08

Applies to: MODEL 203.7 with CODE (413) Panoramic sliding roof up to Model Year 8

Where it sits

Function group 3 Body › 68 Interior equipment › 68.50 Curtains, roller blinds, luggage nets, cargo retainers — Series 203 (models 7**)

GF68.50-P-2002PC

Close function

11.10.00

MODEL 203.7
with CODE (413) Panoramic sliding roof
up to Model Year 8

Function requirements

No overvoltage/undervoltage

Circuit 15R ON or

Circuit 15 ON and

Panoramic sliding roof closed

The overhead control panel control module (N70) detects the neutral position (switch not activated for 40 ms)

Function

The "close sun blind" function is only available when the sun blind drive unit (M24) is in the normalized state.

It is deployed by moving the roof system switch (N70s1) toward the front of the vehicle. The roof system switch (N70s1) must remain manually pressed. The overhead control panel control module (N70) then actuates the sun blind motor (M24m1) which closes the sun blind.The motor operates for as long as the switch is activated or until the sun blind reaches its end position.

The "close sun blind" function is aborted if lock-up of the sun blind is detected.

The sun blind drive unit (M24) is not provided with an obstruction sensor.

Open function

GF68.50-P-2003PC

Lock-up recognition function

GF68.50-P-2005PC

Normalization function

GF68.50-P-2007PC

Panoramic sliding roof roller blind location/task/design/function

GF68.50-P-4101PC

Overhead control panel control module location/task/design/function

GF82.20-P-4101PP

Referenced documents