Storing steering column position, function

P46.15-2096-09

A1 Instrument cluster

M20 Steering column adjustment motor group

M20m1 Fore/aft adjustment motor

M20m2 Height adjustment up/down motor

N10/2 Rear SAM control unit with fuse and relay module

S91/2 Left front seat adjustment switch group

S91/2s9 Memory switch

S91/2s14 Memory button 1, 2, 3 switch

CAN B Controller Area Network bus Class B (interior compartment) (CAN-B)

N32/1 Driver front seat adjustment control unit with memory

N69/1 Door control unit front left

N73 EIS [EZS] control unit

N80 Steering column module

S17/3 Left front door contact switch

S59 Steering column adjustment switch

Function

The current position is always stored

 with the transition from terminal 15 to terminal 15R,

 upon receipt of a request to store a memory position,

 upon receipt of a request to adjust a memory position, even if the function easy entry/exit is switched off.

Before saving the position, the steering column must be moved to the desired position using the steering column adjustment switch (S59).

Save the steering column position as follows:

 First press the memory switch (S91/2s9) for t40ms and release, then press the relevant position key of memory button 1, 2, 3 switch (S91/2s14) within t3s of releasing the memory switch (S91/2s9).

The position of the steering column is stored in the driver-side front seat adjustment control unit with memory (N32/1).

 On vehicles as of 1.6.07 an acoustic feedback takes place via a warning buzzer integrated in the instrument cluster (A1) when the steering column position is stored.