gf2760d2000h

Gear shift, function

Type gf · topic 27.60 · version 0100 · 2006-03-03

Applies to: Transmission 722.6 in MODEL 906.111 /113 /131 /133 /135 /153 /155 /211 /213 /231 /233 /235 /253 /255 /611 /613 /631 /633 /635 /637 /653 /655 /657 /711 /713 /731 /733 /735

Where it sits

Function group 2 Chassis › 27 Automatic transmission › 27.60 Gearshift, control — Series 906 (models 111, 113, 131, 133, 135, 153, 155, 211, 213, 231, 233, 235, 253, 255, 611, 613, 631, 633, 635, 637, 653, 655, 657, 711, 713, 731, 733, 735)

Also applies to engines/gearboxes: 722 6**

GF27.60-D-2000H

Gear shift, function

22.2.06

Transmission 722.6 in MODEL 906.111 /113 /131 /133 /135 /153 /155 /211 /213 /231 /233 /235 /253 /255 /611 /613 /631 /633 /635 /637 /653 /655 /657 /711 /713 /731 /733 /735

On transmission 722.6 the electrohydraulic control unit converts the electric signals going out from the electronic transmission control (EGS) into hydraulic signals. In the event of faults in the ETC the limp-home mode is activated. It is designed so that the driver can also reach a Service operation under extreme conditions.

Selector lever positions "P", "R", "N" and "D" are passed on via the Controller Area Network bus class C (engine compartment) (CAN-C) and mechanically by means of a shift rod to the range selector lever at the transmission end. The shift range is preselected via touching or holding the selector lever "+" or "-" and displayed in the instrument cluster (A1), until the point when an upshift of the transmission is possible.

Gear change, function

GF27.60-D-3010H

Emergency default mode, function

GF27.60-D-3012H

Manual drive mode selection, function

GF27.60-D-3011H

Oil level control, function

GF27.10-D-3024H

Torque converter lockup clutch control, function

GF27.20-D-3002H

Referenced documents