Test values for the cylinder liner |
Number | Designation | Engine 475.9, 476.9 (except 476.93 ) | ||
BE01.40-B-1001-03B | Liner internal diameter (k) | Letter B | mm | 127,990...127,995 |
Letter C | mm | 127,995...128,000 | ||
Letter D | mm | 128,000...128,005 | ||
Letter E | mm | 128,005...128,010 | ||
BE01.40-B-1002-03B | Liner collar diameter (b) | mm | 153,657...153,757 | |
BE01.40-B-1003-03B | Upper adjustment diameter (r) | mm | 145,778...145,800 | |
BE01.40-B-1004-03B | Tappet diameter (z) | mm | 141,8...142,0 | |
BE01.40-B-1005-03B | Liner external diameter (p) | mm | 144,7...145,0 | |
BE01.40-B-1006-03B | Lower adjustment diameter (f) | mm | 144,451...144,475 | |
BE01.40-B-1007-03B | Collar height (y) | mm | 9,90...9,92 | |
BE01.40-B-1008-03B | Collar recess (h) | mm | 1,1...1,15 | |
BE01.40-B-1009-03B | Total length (x) | mm | 269,5...270,5 | |
BE01.40-B-1010-03B | Maximum difference between the four measurement points | mm | 0,02 | |
BE01.40-B-1011-03B | Maximum allowed eccentricity between the upper and lower adjustment (n) | mm | 0,025 | |
BE01.40-B-1012-03B | Maximum allowed wearing in the sliding surface, in the upper point of inversion of the 1st piston ring | mm | 0,08 | |
BE01.40-B-1013-03B | Maximum allowed roundness in the lower adjustment | Externally | mm | 0,06 |
Internally (liner assembled) | mm | 0,04 | ||
BE01.40-B-1014-03B | Distance | between the liner external upper face and the block surface (C) | mm | 0,04...0,08 |
minimum in the case of repair (C) | mm | 0,03 | ||
BE01.40-B-1015-03B | Diameter | external of the upper metallic ring (d) | mm | 153,4...153,6 |
internal of the upper metallic ring (d) | mm | 147,3...147,5 | ||
Normal Thickness | mm | 0,14...0,16 | ||
Normal Thickness I | mm | 0,48...0,52 | ||
BE01.40-B-1016-03B | Thickness of the shim rings in the cases of the block machining | mm | 0,80; 1,00; 1,50 |