Modification notes |
06.12.2019 | Value changed:Cylinder head height (A) | ||
06.12.2019 | Value changed:Projection of the injection nozzle relative to the underside of the head | ||
06.12.2019 | Value changed:Longitudinal unevenness of head mating surface | ||
06.12.2019 | Value changed:Crosswise unevenness of head mating surface | ||
06.12.2019 | Value changed:Maximum parallel deviation of lower and upper cylinder head faces | ||
06.12.2019 | Value changed:Maximum roughness of head surface (Rz) |
Test values for the head |
Number | Designation | Engine 372.9, 376.9 (except fired engines) | Fired engine 376.9 | ||
BE01.30-B-1001-02A | Cylinder head height (A) | Normal | mm | 91,9...92,1 | 91,9...92,1 |
Minimum after machining | 90,9 | 90,9 | |||
BE01.30-B-1002-02A | Projection of the injection nozzle relative to the underside of the head | DLLA nozzles | mm | 1,6...2,6 | - |
DSLA nozzles | mm | 2,62...3,49 | - | ||
BE01.30-B-1003-02A | Longitudinal unevenness of head mating surface | Maximum permissible limit for reutilization | mm | 0,15 | 0,15 |
Maximum permissible for new or machined cylinder head | mm | 0,05 | 0,05 | ||
BE01.30-B-1004-02A | Crosswise unevenness of head mating surface | Maximum permissible limit for reutilization | mm | 0,03 | 0,03 |
Maximum permissible for new or machined cylinder head | mm | 0,015 | 0,015 | ||
BE01.30-B-1005-02A | Maximum parallel deviation of lower and upper cylinder head faces | mm | 0,10 | 0,10 | |
BE01.30-B-1006-02A | Maximum roughness of head surface (Rz) | mm | 0,016 | 0,016 |