1 | Toll recording unit |
2 | Communications module |
3 | Multifunction antenna |
D82.88-0030-06
Danger ! | Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries | No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. | |
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove | ||
1 | Switch off ignition | ||
2 | Disconnect ground line from battery | ||
3 | Remove front headliner | ||
| |||
Long wedge | |||
4 | Remove center section of dashboard | ||
| |||
| Install | ||
5 | Install support battery in the on-board unit (toll acquisition device) (2) | ||
6 | Install multifunction antenna (3) | ||
7 | Connect wiring harness for toll system | ||
8 | Determine available source for speed signal according to the vehicle equipment and route and connect electrical line for speed signal to source | See wiring diagram. | |
9 | Retrofit equipment installation frame | ||
10 | Connect and install on-board unit (toll recording unit) (1) | ||
11 | Determine installation location of communications module (2) | ||
12 | Connect and install communications module (2) | ||
13 | Install remaining parts | ||
14 | Store vehicle and customer data with the service PC in the on-board unit (toll acquisition device) (2) | The procedure on the service PC can be obtained from the documents from the course "Installation of vehicle device" of the Toll Collect company. | |
| Check | ||
15 | Check operation and carry out road test |
115 589 03 59 00
Long wedge
Parts ordering note |
Part no. | Designation | Quantity |
A 670 687 00 09 | Cover | 1 |
N 000000 000528 | Screw | 4 |
A 670 687 01 14 | Bracket | 1 |
A 002 990 62 97 | Rivet | 4 |
N 009021 005205 | Washer | 6 |
A 002 994 93 45 | Fuse | 4 |
A 000 827 01 34 | Spring | 1 |
N 000000 002035 | Screw | 2 |
A 011 545 80 26 | Contact spring | 2 |
A 004 545 00 26 | Contact spring | 1 |
A 015 545 70 26 | Contact spring | 1 |
Referenced documents
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar6810d1030a Removing and installing center section of instrument panel
- ar6830d7607ae Remove/install front headliner
- as5410z000101a Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of
- az8288d000003a Retrofit toll system wiring harness
- az8288d000013a Retrofit backup battery in on-board unit
- az8288d000016a Retrofit equipment installation frame
- az8288d000102a Retrofit multifunction antenna
- az8288d000115a Define installation location for toll recording unit
- az8288d000301a Retrofit on-board unit
- az8288d000401a Retrofit communications module