Retrofit FleetBoard DispoPilot

AZ82.85-W-2005D

Retrofit FleetBoard DispoPilot

13.05.2013

MODEL

950.0##/1##/2##/3## ## as of 472726, 952.0##/1##/2##/3## ## as of 472726, 953.1##/3## ## as of 472726, 954.0##/1##/2## ## as of 472726

with CODE EX3 (Provision for fitting telematics)

with CODE F04 (Cab L (long))

without CODE DD1 (Cab with 1400 mm floor-to-ceiling height (car transporter))

without CODE DD2 (Cab with 1550 mm floor-to-ceiling height)

without CODE F15 (MEGASPACE cab)

MODEL

950.0##/1##/2##/3## ## as of 472726, 952.0##/1##/2##/3## ## as of 472726, 953.1##/3## ## as of 472726, 954.0##/1##/2## ## as of 472726

with CODE EX3 (Provision for fitting telematics)

with CODE F15 (MEGASPACE cab)

without CODE DD1 (Cab with 1400 mm floor-to-ceiling height (car transporter))

without CODE DD2 (Cab with 1550 mm floor-to-ceiling height)

without CODE F04 (Cab L (long))

Modification notes

19.04.2013

Parts ordering note updated.

1

FleetBoard®vehicle computer

2

FleetBoard®DispoPilot

3

Cradle (FleetBoard®DispoPilot support)



Remove

1

Disconnect ground line from battery



AR54.10-W-0003A

2

Remove footwell cover on A-pillar on driver side



AR68.30-W-1310A

3

Remove driver-side door sill trim



AR68.30-W-4415A

4

Release Instrument (INS) and fold back



AR54.30-W-6027B

 Do not disconnect electrical leads.

5

Remove cover from center switch panel

6

Release and fold out center switch panel

 Do not disconnect electrical leads.

7

Move driver seat and backrest to foremost position

8

Remove stowage box behind driver seat

 The stowage box is fastened to the floor using 4 bolts and to the rear panel using 2 bolts.



Install

9

Retrofit wiring harness for FleetBoard®

Vehicles with code F15 (MEGASPACE cab)

AZ82.85-W-0001-16E

Vehicles with code F04 (Cab L (long))

AZ82.85-W-0001-16F

Electrical connection diagram for FleetBoard® telematics when retrofitting

AZ82.85-W-0001-07D

10

Install stowage box behind driver seat

 Ensure that DispoPilot wiring harness, FleetBoard® wiring harness, GSM antenna line and GPS antenna line are not pinched.

11

Prepare FleetBoard® vehicle computer (1) and FleetBoard® DispoPilot (2) for installation

AZ82.85-W-2005-01C

12

Connect and install FleetBoard® vehicle computer (1) and FleetBoard® DispoPilot (2)

AZ82.85-W-2005-02C

13

Fill out FleetBoard® initial startup form and send by fax



OF82.85-W-3000-02A

 The FleetBoard® administrator will establish contact after receiving the fax to log on the vehicle in the FleetBoard® server.

14

Fold in and fasten center switch panel

15

Install cover of center switch panel

16

Install instrument cluster (INS)



AR54.30-W-6027B

17

Install driver-side door sill trim



AR68.30-W-4415A

18

Install footwell cover at driver side



AR68.30-W-1310A

19

Connect ground cable to battery



AR54.10-W-0003A

20

Activate FleetBoard® telematics platform in vehicle using diagnostic system

AZ82.85-W-1000-11C

Parts ordering note

Part no.

Designation

Quantity

A 970 002 28 99

FleetBoard® preinstallation parts kit, code EX3

1

A 930 002 45 99

FleetBoard® vehicle computer

1

A 930 002 51 99

DispoPilot mobile upgrade parts kit

1

A 930 002 54 99

Universal bracket for DispoPilot Truck

1

Ordering address for operating instructions. Within Germany: Use the After-Sales portal on the Internet or as an alternative email: [email protected] telephone: +49-1805-010-7979 fax: +49-1805-010-7978 Outside Germany: Please contact the contact person responsible for your market.

6462 2734 76

FleetBoard® operator's manual in German, English, French, Polish, Czech, Romanian, Bulgarian, Dutch, Italian, Spanish

n. B.

6462 2732 41

DispoPilot operator's manual in German, English, French

n. B.

6462 2732 76

DispoPilot operator's manual in Polish, Czech, Romanian, Bulgarian

n. B.

6462 2733 76

DispoPilot operator's manual in Dutch, Italian, Spanish

n. B.