Retrofit FleetBoard vehicle computer

AZ82.85-D-2006A

Retrofit FleetBoard vehicle computer

17.2.14

MODEL

906

with CODE ED5 (Parameterizable special module (PSM))

N149

FleetBoard control unit

11

Left lower A-pillar trim

18

Engine hood release handle

Shown on vehicle with CODE EH4 (Comfort telephony) or with CODE JV4 (Universal preinstallation for mobile phone)

17

Global System Mobile (GSM) window antenna

 Danger !

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S



Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A



Remove

1

The installation location of the "DispoPilot Mobile+" is to be agreed with the customer

2

Remove headliner



AR68.30-D-4300B

3

Remove engine hood release handle (18)

4

Remove left lower A-pillar trim (11)

5

Remove door sill trim at left front



AR68.30-D-1306B

6

Remove air vent cover at instrument panel center part

with CODE EJ4 (Audio 50 APS) with CODE EJ5 (Audio 50 APS with DVD changer) with CODE EJ6 (COMAND APS) with CODE EJ7 (COMAND APS with DVD changer) with CODE EN4 (COMAND with TMC interface) with CODE EN8 (Sound 50 APS radio)



AR68.10-D-1585A

7

Remove digital tachographs



with CODE JD1 (EU digital tachograph) with CODE JD2 (EU digital tachograph with rpm and additional recorder)

AR54.61-D-0008A

 Do not disconnect electrical leads.

8

Remove radio, disconnect Global Positioning System (GPS) antenna line and fix in place using felt tape



Remove/install radio

MODEL 906
with CODE ED5 (Parameterizable special module (PSM))
with CODE EF9 (Radio Sound 20)
with CODE EJ2 (Audio 20)
with CODE EJ3 (AUDIO 20 with CD changer)
with CODE EJ4 (Audio 50 APS)
with CODE EJ5 (Audio 50 APS with DVD changer)
with CODE EJ6 (COMAND APS)
with CODE EJ7 (COMAND APS with DVD changer)
with CODE EN0 (Sound 5 radio)
with CODE EN4 (COMAND with TMC interface)
with CODE EN6 (Audio 10)
with CODE EN7 (Audio 15)
with CODE EN8 (Radio sound 50 APS)

AR82.60-D-7502B

 The GPS antenna line is no longer required.

9

Separate GSM antenna line at electrical connectors in roof and fix in place with felt tape

with CODE EH4 (Comfort telephony) with CODE JV4 (Universal preinstallation for mobile phone)

 The GSM antenna line is no longer required.

10

Disconnect GPS antenna line and GSM antenna line of vehicle wiring harness from antenna amplifier (A2/18) and fix in place at vehicle wiring harness using felt tape

with CODE EJ4 (Audio 50 APS) with CODE EJ5 (Audio 50 APS with DVD changer) with CODE EJ6 (COMAND APS) with CODE EJ7 (COMAND APS with DVD changer) with CODE EN4 (COMAND with TMC interface) with CODE EN8 (Sound 50 APS radio)

 The GPS antenna line and GSM antenna line are no longer required.

11

Remove driver seat



AR91.10-D-1010H



Install

12

Retrofit antenna amplifier (multifunction antenna)

except CODE ED3 (Antenna for GSM, GPS, UMTS network) except CODE EJ4 (Audio 50 APS) except CODE EJ5 (Audio 50 APS with DVD changer) except CODE EJ6 (COMAND APS) except CODE EJ7 (COMAND APS with DVD changer) except CODE EN4 (COMAND with TMC interface) except CODE EN8 (Sound 50 APS radio)

AZ82.85-D-0001-14A

 GPS multifunction antenna, GSM (1350) to roof

*BA82.62-N-1002-01C

13

Glue GSM window antenna (17), as shown, onto sightproofing area of windshield

with CODE EH4 (Comfort telephony) with CODE JV4 (Universal preinstallation for mobile phone)

 Degrease bonding area.

14

Route antenna line of GSM window antenna (17)

with CODE EH4 (Comfort telephony) with CODE JV4 (Universal preinstallation for mobile phone)

 To do so, route antenna line of GSM window antenna (17) along A-pillar to mobile phone cradle, fix in place with cable ties.

15

Retrofit antenna for global positioning system (GPS)

with CODE EJ4 (Audio 50 APS) with CODE EJ5 (Audio 50 APS with DVD changer) with CODE EJ6 (COMAND APS) with CODE EJ7 (COMAND APS with DVD changer) with CODE EN4 (COMAND with TMC interface) with CODE EN8 (Sound 50 APS radio)



AN82.61-D-7474-04A

16

Install radio



MODEL 906
with CODE ED5 (Parameterizable special module (PSM))
with CODE EF9 (Radio Sound 20)
with CODE EJ2 (Audio 20)
with CODE EJ3 (AUDIO 20 with CD changer)
with CODE EJ4 (Audio 50 APS)
with CODE EJ5 (Audio 50 APS with DVD changer)
with CODE EJ6 (COMAND APS)
with CODE EJ7 (COMAND APS with DVD changer)
with CODE EN0 (Sound 5 radio)
with CODE EN4 (COMAND with TMC interface)
with CODE EN6 (Audio 10)
with CODE EN7 (Audio 15)
with CODE EN8 (Radio sound 50 APS)

AR82.60-D-7502B

17

Retrofit bracket for FleetBoard control unit (N149)

except CODE FF8 (1 DIN slot at front below headliner)

AZ82.85-D-2006-02A

18

Retrofit FleetBoard wiring harness

with CODE JD1 (EU digital tachograph) with CODE JD2 (EU digital tachograph with rpm and additional recorder)

AZ82.85-D-0001-16A

except CODE JD1 (EU digital tachograph) except CODE JD2 (EU digital tachograph with rpm and additional recorder)

AZ82.85-D-0001-16B

 Wiring harness repair kit, basic

*000589139900

 New passenger car wiring harness repair kit

*220589049900

19

Install digital tachographs

with CODE JD1 (EU digital tachograph) with CODE JD2 (EU digital tachograph with rpm and additional recorder)



AR54.61-D-0008A

20

Install headliner



AR68.30-D-4300B

 Do not install dome lamp yet. Route lines for FleetBoard control unit (N149) through the opening.

21

Connect and install FleetBoard control unit (N149)

AZ82.85-D-2006-01A

22

Connect plug to dome lamp and install dome lamp into headliner

23

Install driver seat



AR91.10-D-1010H

24

Install air vent cover at instrument panel center part



AR68.10-D-1585A

 Only if air vent cover was removed.

25

Install door sill trim at left front



AR68.30-D-1306B

26

Install left lower A-pillar trim (11)

27

Install engine hood release handle (18)

28

Fill out FleetBoard initial startup form and send in by fax



OF82.85-D-3000-02A

 The FleetBoard administrator will establish contact after receiving fax to log the vehicle on to the FleetBoard server.

29

Enable FleetBoard through the parameterizable special module (PSM)

AZ82.85-D-2006-03A

 Enable output on terminal 15, as well as fleet management system (FMS).

30

Document retrofitted equipment via vehicle documentation (VeDoc)

 with CODE YM1 (FleetBoard vehicle computer)
Document retrofitting of FleetBoard vehicle computer in VeDoc.

 Antenna

Number

Designation

MODEL 906

BA82.62-N-1002-01C

GPS multifunction antenna, GSM (1350) to roof

Nm

5

Parts ordering note

Part no.

Designation

Quantity

A 906 005 36 99

Parts kit preinstallation for FleetBoard NCV3

1

A 906 005 37 99

Parts kit for TIIREC NCV3

1

A 906 005 38 99

Parts kit for DP Mobile NCV3

1

A 906 005 69 99

Parts kit for data interface

1