Retrofitting TV/video system

AZ82.60-W-0010A

Retrofitting TV/video system

16.2.12



Install

1

Switch off ignition

 Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

2

Disconnect battery



Notes on battery

AH54.10-P-0001-01A

3

Retrofit TV system

AZ82.60-W-0002A

4

Make cut-out (A) in rear wall of stowage compartment (1)

 The cut-out (A) allows the implement carrier to be attached.

5

Make cut-out (B) in rear wall of stowage compartment (1)

 The cut-out (B) allows the electrical cable to be routed from the right stowage compartment to the storage compartment.

6

Route cable 1 for voltage supply, left audio cable, right audio cable and video cable

 The branch-off line from cable 1 for providing the video player (4) voltage supply has a hollow plug and is approximately 70 cm long.

It is routed from the right stowage compartment through the cutout (B) into the storage compartment.

7

Connect left audio cable, right audio cable and video cable to digital receiver

 Only if a digital receiver is installed.

Note TV system connecting diagram.

AZ82.60-W-0002-05A

8

Connect left audio cable and right audio cable to audio filter with adapter

 Only if no digital receiver is installed.
The audio filter adapter is supplied with the TV/video kit.

Note TV system connecting diagram.

AZ82.60-W-0002-05A

9

Connect video cable to monitor (3)

Only if no digital receiver is installed.

Note TV system connecting diagram.

AZ82.60-W-0002-05A

10

Attach additional ground line on left side to monitor bracket

 Unscrew lower bolt for attaching monitor (3) to monitor bracket and screw in again together with ground line.

Note TV system connecting diagram.

AZ82.60-W-0002-05A

11

Attach additional ground line to frame for storage and stowage compartments

 Remove cover strip (6), screw ground line to frame for storage and stowage compartments and re-fit the cover strip (6).

12

Install video player (4) in implement carrier

 Fit video player (4) in provided recesses in implement carrier.

13

Connect cable 1, left audio cable, right audio cable and video cable to video player (4)

 Use the adapter provided with the TV/video kit for the video player (4) to connect the two audio cables to the video player (4).

Note TV system connecting diagram.

AZ82.60-W-0002-05A

14

Attach implement carrier to monitor bracket

 Attach the implement carrier to the monitor bracket with four screws.

The implement carrier and the monitor bracket are screwed to the base of the stowage compartment (2) at the same time by leading the bolts through the four holes in the base of the stowage compartment (2).

15

Install paneling (5).



Note on removing and installing the paneling for the TV system

AH82.60-N-0001-04A

 Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

16

Connect battery



Notes on battery

AH54.10-P-0001-01A

17

Perform function test on video player (4)

Part no.

Designation

Quantity

B6 782 1162

TV/video kit

1