ar9800p2011mfx

Assembly and covering work when painting the liftgate

Type ar · topic 98.00 · version 0100 · 2019-10-04

Applies to: Model 247.6/7

Where it sits

Function group 3 Body › 98 Paintwork › 98.00 General — Series 247 (models 6**, 7**)

EinPAS 40 Preservation/paintwork › 40.15 Paintwork/paintwork care › 40.15.31 Painting, metal substrate — Series 247 (models 6**, 7**)

EinPAS 40 Preservation/paintwork › 40.15 Paintwork/paintwork care › 40.15.40 Painting, plastic substrate — Series 247 (models 6**, 7**)

AR98.00-P-2011MFX

Assembly and covering work when painting the liftgate

11.09.2019

Model

247.6/7

Assembly and covering work when painting the liftgate

P98.00-A028-08

Liftgate in paint stage 2/3 in installed condition, shown on model 247.6

Topical note

Notes on paintwork repairs

AH98.00-P-9408-02A

General information on masking for paintwork

AH98.00-P-0200-01BK

Masking off and covering

1

Remove Mercedes star and retaining grommets.

Installation: Replace retaining grommets.

Long wedge

*115589035900

2

Remove handle strip.

3

Remove inner left rear lamp unit and inner right rear lamp unit from liftgate.

Model 247.6/7

Model 247.6

AR82.10-P-4926MFA

4

Remove model badges from liftgate.

If installed.

Installation: Replace model badge.

5

Mask off all openings at liftgate using masking tape.

https://xentry.daimler.com
Section "Guidelines for paint technology".

6

Mask off liftgate all the way round.

https://xentry.daimler.com
Section "Guidelines for paint technology".

7

Cover areas of vehicle that are not to be painted using film.

https://xentry.daimler.com
Section "Guidelines for paint technology".

Assembly and covering work when painting the liftgate

115 589 03 59 00

Long wedge

Referenced documents