AR91.60-P-0800RT | Remove/install WSS control unit | 14.4.08 |
MODEL 251
up to model year 09
with CODE (494) USA version
Only passenger-side front seat
P54.30-8423-06
1 Passenger side front seat
N2/13 WSS (Weight Sensing System) control unit
P54.30-8424-06
1 Passenger side front seat
2 Bolts
N2/13 WSS (Weight Sensing System) control unit
Modification notes
26.7.06 | "Disconnect/connect ground line for battery" and "Perform basic programming" eliminated | Steps 1 and 8 |
| Remove/install | ||
Danger! | Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. | |
| Information on preventing damage to electronic components due to electrostatic discharge | ||
1 | Remove passenger side front seat (1) | ||
2 | Remove bolts (2) | ||
3 | Disconnect all electrical connectors from WSS control unit (weight sensing system) (N2/13) (arrow A) | Do not damage electrical connectors and cable! | |
Installation: Ensure that cable is routed correctly! | |||
4 | Remove WSS control unit (weight sensing system) (N2/13) | ||
5 | Install in the reverse order | ||
6 | Calibrate left front, right front, left rear and right rear WSS (Weight Sensing System) sensors with STAR DIAGNOSIS diagnosis system | Plates | |
| Connect STAR DIAGNOSIS and read out fault memory |
Plates
211 589 00 32 00
Referenced documents
- ad0000p200004a Connect STAR DIAGNOSIS and read out fault memory
- ad0000p200004a
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- ar9110p1000rt Remove/install front seat
- as9100z000101a Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.