Remove/install front seat · ar9110p1000rt · Mercedes-Benz WIS

AR91.10-P-1000RT

Remove/install front seat

3.8.06

MODEL 251

P91.10-2866-09

Exemplified on model 164, with electrically adjustable driver seat, steering column and outside mirrors with memory, code 275

1 Front seat

2 Cover for belt end fitting

3 Bolt

4 Bolts

5 Bolts

6 Front runner cover

13 Rear runner cover

N32/1 Driver front seat adjustment control unit with memory

X55/3 Left front seat contacting strip

7 Electrical connector

8 Electrical connector

9 Electrical connector

10 Electrical connector

11 Pneumatic line

12 Cable tie

Modification notes

26.7.06

Disconnect/connect ground line of battery and perform basic programming, removed

Steps 8 and 21

 	Remove/install
1	Lower head restraint
2	Move steering wheel up
3	Adjust front seat (1) to front
4	Unclip belt end fitting cover (2)	 Long wedge	*115589035900
5	Remove screw (3)		*BA91.40-P-1001-01N
6	Remove bolts (4)	 Installation: Replace bolts (4), align seat rails.
			*BA91.10-P-1002-01N
7	Position front seat (1) to rear
8	Remove screws (5)	 Installation: Replace bolts (5), align seat rails.
			*BA91.10-P-1002-01N
9	Lift front seat at front (1)
10	Remove front runner covers (6)
11	Disconnect electrical connector (7, 8) from left front seat contacting strip (X55/3) or right front seat contacting strip (X55/4)
12	Disconnect electrical connector (9, 10) from driver front seat adjustment control unit with memory (N32/1) or front passenger front seat adjustment control unit with memory (N32/2)	 Only in vehicles with electrically adjustable driver seat, steering column and outside mirrors with memory, code 275.
13	Detach pneumatic line (11)	 Only in vehicles with left multicontour seat, code 404 or vehicles with right multicontour seat, code 405.
14	Remove cable ties (12)	 Installation: Use new cable tie (12).
15	Lift front seat at rear (1)
16	Remove rear runner covers (13)
17	Lift out front seat (1)	 Use helper
18	Install in the reverse order
19	Calibrate left front, right front, left rear and right rear WSS (Weight Sensing System) sensors with STAR DIAGNOSIS diagnosis system	Only front seat at passenger side in vehicles with USA version, code 494.
		 Plates	*211589003200
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A
		STAR DIAGNOSIS diagnosis system	*WH58.30-Z-1048-13A

 Front seats

Number	Designation		Model 251


BA91.10-P-1002-01N	Bolt on front seat of body	Nm	45

 Seat belts/emergency tensioning retractors

Number	Designation		Model 251


BA91.40-P-1001-01N	Screw at belt end fitting	Nm	35

211 589 00 32 00

Plates

Long wedge

115 589 03 59 00

Commercially available tools

Number	Designation
WH58.30-Z-1048-13A	STAR DIAGNOSIS diagnosis system, Compact Passenger Car	6511 1801 00

Referenced documents

ad0000p200004a Connect STAR DIAGNOSIS and read out fault memory
ad0000p200004a