ar9160p0680rt

Remove/install passenger airbag unit

Type ar · topic 91.60 · version 0104 · 2018-05-07

Applies to: Model 251

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.60 Airbag, pedestrian protection — Series 251

EinPAS 27 Passive safety/restraint systems › 27.16 Airbag › 27.16.20 Airbag — Series 251

AR91.60-P-0680RT

Remove/install passenger airbag unit

25.04.2018

Model

251

Remove/install passenger airbag unit

P91.60-3092-09

1

Instrument panel

3

Wiring harness

4

Nuts

2

Front passenger airbag

Remove/install passenger airbag unit

P91.60-3093-07

1

Instrument panel

R12/4

Front passenger airbag squib 1

2

Front passenger airbag

R12/5

Passenger airbag squib 2

4

Nuts

Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

Remove/install

1

Switch off ignition and store transmitter key outside of transmission range (min. 2  m)

2

Disconnect battery ground line

AR54.10-P-0003RT

3

Dashboard (1) removal

AR68.10-P-1000RT

4

Unscrew nuts (4) and remove front passenger airbag (2) from instrument panel (1)


Handle front passenger airbag (2) carefully.
Otherwise, the paper cover on the front passenger airbag (2) may be damaged.

If the front passenger airbag (2) is replaced, the wiring harness (3) must be replaced.

Installation: The wiring harness (3) for the front passenger airbag unit (2) must be correctly routed. It must not be jammed or pass between the front passenger airbag unit (2) and the dashboard (1)!

Nut, front passenger airbag unit to dashboard

*BA91.60-P-1012-01K

5

Install in the reverse order

Check

6

Connect diagnostic system; read out fault memory

When replacing front passenger airbag (2).

AD00.00-P-2000-04A

Airbag

Number

Designation

Model 251
except code 494 (US version)

Model 251
with code 494 (US version)

BA91.60-P-1012-01K

Nut, front passenger airbag unit to dashboard

Nm

6

6

Referenced documents