ar9160d0733ts

Remove/install acceleration sensor on B-pillar

Type ar · topic 91.60 · version 0100 · 2018-03-29

Applies to: Model 907, 910

Where it sits

Function group 3 Body › 91 Seats, bunks, restraint systems › 91.60 Airbag, pedestrian protection — Series 907 · Series 910

EinPAS 27 Passive safety/restraint systems › 27.16 Airbag › 27.16.12 Sensor/switch/wiring harness — Series 907 · Series 910

EinPAS 27 Passive safety/restraint systems › 27.17 Restraint system › 27.17.12 Sensor/switch/wiring harness — Series 907 · Series 910

AR91.60-D-0733TS

Remove/install acceleration sensor on B-pillar

15.03.2018

Model

907, 910

Remove/install acceleration sensor on B-pillar

D91.60-1209-08

1

Acceleration sensor

3

Electrical connector

2

Insulation

4

Screw

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

2

Remove left or right front door sill trim.

AR68.30-D-1306TS

3

Remove insulation (2).

4

Disconnect electrical connector (3).

5

Remove screw (4) and remove acceleration sensor (1) from B-pillar.

Screw, acceleration sensor to B-pillar

*BA91.60-D-1002-01TS

6

Install in the reverse order.

Check

7

Check Supplemental Restraint System (SRS) using vehicle diagnosis system.

AD00.00-D-2000-06TS

Airbag

Number

Designation

Model 907, 910

BA91.60-D-1002-01TS

Screw, acceleration sensor to B-pillar

Nm

8

Referenced documents