Seat belt height adjustment mechanism (front seat) removal and installation · ar9140p1100rt · Mercedes-Benz WIS

AR91.40-P-1100RT

Seat belt height adjustment mechanism (front seat) removal and installation

17.2.05

MODELS 251

P91.40-2590-08

1 Upper B-pillar paneling

2 Bolt

3 Sliding block

4 Release button

5 Nuts

6 Seat belt height adjuster

 	Remove/Install
1	Move front seat as far forward as possible with seat backrest upright	 See Operator's Manual
2	Switch off ignition and remove the transmitter key from the EIS [EZS] control unit	 On vehicles with Keyless Go, code 889: Press keyless go start/stop button repeatedly until ignition is switched off Remove transmitter key from vehicle and store it in a location beyond its transmission range (at least 2 m).
3	Remove upper B-pillar paneling (1)	 Remove upper part of B-pillar paneling until seat belt height adjuster is accessible.	AR68.30-P-4700RT
4	Unscrew bolt (2) from seat belt guide bracket.		*BA91.40-P-1002-01N
5	Release sliding block (3) and slide to center of belt height adjuster until nuts (5) are accessible	 Press release button (4) to do this (arrow).
6	Unscrew nuts (5) and remove belt height adjuster (6).		*BA91.40-P-1003-01N
7	Install in the reverse order

 Seat belts/emergency tensioning retractors

Number	Designation		Model 251


BA91.40-P-1002-01N	Screw at front upper belt guide fitting	Nm	35
BA91.40-P-1003-01N	Nut for belt height adjuster to B-pillar	Nm	24